2016 Jeep Compass ABS Pump Control Module 68212478 VIN Programmed
- $499.00
-
Regular price
$1,312.50 -
-61%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2016 Jeep Compass ABS Pump Control Module 68212478 VIN Programmed
2016 Jeep Compass ABS Pump Control Module – 68212478AB
Anti-Lock Brake System (ABS) Pump Module | Without Hill Start Assist | OEM-Advertised Replacement | VIN Programming Available
Looking for a replacement 2016 Jeep Compass ABS Pump Control Module 68212478AB?
Auto Computer Performance offers an ABS pump module advertised for select 2016 Jeep Compass vehicles equipped with a compatible factory anti-lock braking system without Hill Start Assist.
The ABS system monitors wheel speed information and helps regulate brake pressure during anti-lock braking events. Depending on the vehicle's factory equipment, the system may also support traction control and electronic stability control.
The supplied product information identifies 68212478AB as the primary part number and specifically describes the application as W/O Hill Start Assist.
This equipment distinction is essential when determining whether the module is compatible with your Jeep Compass.
IMPORTANT: THIS MODULE IS ADVERTISED FOR VEHICLES WITHOUT HILL START ASSIST. VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER, VIN, AND FACTORY BRAKING SYSTEM CONFIGURATION BEFORE ORDERING.
Key Features
-
Primary Vehicle: 2016 Jeep Compass
-
Primary Part Number: 68212478AB
-
Component Type: ABS Pump / Anti-Lock Brake Control Module
-
Hill Start Assist Configuration: Without Hill Start Assist
-
OEM Identification: Advertised as OEM
-
VIN Programming: Vehicle-specific programming offered
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed sensor information
-
Brake Pressure Regulation: Supports applicable ABS hydraulic control functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Original part number, VIN, and Hill Start Assist configuration recommended
Vehicle Compatibility
2016 Jeep Compass
-
2016 Jeep Compass — select configurations without Hill Start Assist
The supplied product listing identifies the 2016 Jeep Compass as the primary vehicle application.
Exact compatibility may depend on:
-
Original ABS control module part number
-
Vehicle VIN
-
Hill Start Assist equipment
-
Engine configuration
-
Front-wheel-drive or four-wheel-drive configuration
-
Vehicle trim and factory options
-
Factory ABS and stability control equipment
Important: Not every 2016 Jeep Compass necessarily uses the same ABS pump control module.
A matching model year alone does not establish compatibility.
Jeep Patriot Compatibility
The supplied product description also mentions compatible Jeep Patriot models.
However, the source does not establish which Jeep Patriot configurations use 68212478AB.
Do not assume that this module fits every Jeep Patriot or that Compass and Patriot ABS modules are universally interchangeable.
Patriot compatibility must be confirmed separately using the original part number, VIN, and factory braking system configuration.
Without Hill Start Assist – Important Fitment Requirement
What Does W/O Hill Start Assist Mean?
W/O Hill Start Assist means without Hill Start Assist.
Hill Start Assist is a vehicle feature designed to help limit unintended rollback when starting on an incline under applicable conditions.
The supplied product information specifically identifies this ABS pump module for a configuration without Hill Start Assist.
Why This Matters
Vehicles equipped with Hill Start Assist may require a different ABS module or hydraulic control configuration.
Installing a module that does not match the vehicle's factory equipment may result in:
-
Incorrect ABS system configuration
-
Diagnostic trouble codes
-
ABS warning lights
-
Traction control warnings
-
Electronic stability control warnings
-
Communication problems
-
Initialization or calibration problems
-
Incomplete operation of factory braking-related features
These are possible compatibility concerns, not confirmed outcomes for every mismatched module.
Before ordering, verify whether your 2016 Jeep Compass is equipped with Hill Start Assist.
Use the vehicle's factory equipment information or VIN-based verification rather than relying solely on dashboard appearance.
Part Numbers and Cross-References
Primary Part Number
68212478AB
This is the primary part number supplied for the 2016 Jeep Compass ABS pump module.
Part Number Identification
The part number includes:
-
Base Number: 68212478
-
Full Part Number: 68212478AB
-
Suffix: AB
The complete part number should be used when comparing the replacement with the original ABS module.
Different suffixes may represent distinct revisions or configurations.
Important: No additional confirmed replacement numbers or manufacturer supersession relationships were provided in the supplied listing.
Do not assume that visually similar Jeep ABS modules or other suffix revisions are interchangeable with 68212478AB.
OEM ABS Pump Control Module
The supplied listing describes 68212478AB as an OEM anti-lock braking system pump module.
An original-equipment ABS component is intended to support the vehicle's factory braking system when correctly matched and installed.
However, the supplied information does not independently establish:
-
Original-equipment authenticity
-
Whether the unit is new, used, repaired, or remanufactured
-
Specific testing procedures
-
Software version
-
Warranty coverage
-
Whether the complete hydraulic pump assembly is included
Confirm these details before purchasing.
VIN Programming
Vehicle-specific VIN programming is offered for this ABS module.
Recommended Information Before Ordering
-
17-digit vehicle identification number (VIN)
-
Vehicle year and model
-
Original ABS module part number
-
Hill Start Assist configuration
-
Engine configuration
-
Drivetrain configuration
-
Factory braking system equipment
-
Stored diagnostic trouble codes, if available
Providing the VIN and original module number helps support compatibility verification.
Depending on the vehicle's equipment and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2016 Jeep Compass ABS Module Problems
A malfunctioning ABS pump or control module may be associated with several braking system symptoms.
These are general ABS-related symptoms and are not confirmed failures specific to part number 68212478AB.
ABS Warning Light Illuminated
An illuminated ABS warning light indicates that the vehicle has detected a fault requiring diagnosis.
Possible causes may include wheel speed sensor faults, wiring problems, electrical supply issues, or an ABS module malfunction.
Traction Control Warning Light
Depending on factory equipment, an ABS-related fault may also affect traction control operation.
Electronic Stability Control Warning
ABS system problems may affect electronic stability control functions in applicable vehicle configurations.
ABS Pump Motor Problems
An ABS pump motor or associated electrical circuit fault may produce warning lights or diagnostic trouble codes.
ABS Communication Problems
A diagnostic scanner may be unable to communicate with the ABS module when a power supply, ground, wiring, network, or internal controller fault is present.
Intermittent ABS Operation
Electrical or communication problems may cause inconsistent ABS functionality.
Wheel Speed Sensor Problems
Wheel speed sensor faults may affect ABS operation.
However, a wheel speed sensor diagnostic code does not necessarily indicate that the ABS module itself is defective.
Diagnostic Note: Similar symptoms may result from components other than the ABS module.
Professional diagnosis is recommended before replacing the controller.
Common ABS Diagnostic Trouble Codes
The supplied product information does not identify specific diagnostic trouble codes for 68212478AB.
The following codes are general examples of ABS-related faults that may occur in applicable vehicle systems. They are not verified as specific faults for this part number.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate a pump motor electrical problem or insufficient supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic fault within an ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Fault
May identify an internal electronic malfunction in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These diagnostic codes do not independently establish that 68212478AB requires replacement.
Use vehicle-specific service information and diagnostic procedures before ordering.
ABS Pump Control Module Functions
Depending on factory equipment, the ABS system supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
ABS pump motor operation
-
Traction control
-
Electronic stability control
-
ABS diagnostic monitoring
-
Communication with other vehicle control modules
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control under appropriate conditions.
Replacing a faulty module is intended to restore the vehicle's original braking system functions rather than add capabilities beyond its factory equipment.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Recommended Installation Procedure
-
Verify the original ABS module part number.
-
Confirm the vehicle is configured without Hill Start Assist.
-
Verify compatibility using the vehicle VIN.
-
Confirm which replacement components are included.
-
Install the compatible ABS module or pump assembly according to the applicable service procedure.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic braking system if it was opened.
-
Clear stored diagnostic trouble codes.
-
Verify communication with the ABS module.
-
Confirm ABS, traction control, and stability control operation.
Important: The supplied listing describes an ABS pump module but does not establish whether the replacement includes the electronic controller alone, the hydraulic pump, or a complete ABS assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68212478AB fit my 2016 Jeep Compass?
The supplied listing identifies the 2016 Jeep Compass, specifically select applications without Hill Start Assist. Confirm the original part number and VIN.
2. What is the primary part number?
The primary part number is 68212478AB.
3. What does W/O Hill Start Assist mean?
It means the listed application is without Hill Start Assist.
4. Will this ABS module work on a Jeep Compass equipped with Hill Start Assist?
Compatibility has not been established for vehicles equipped with Hill Start Assist. Do not assume this module will fit.
5. How can I determine whether my Jeep Compass has Hill Start Assist?
Check the vehicle's factory equipment information or have the configuration verified using its VIN.
6. Does this module fit every 2016 Jeep Compass trim?
Not necessarily. Compatibility depends on the original ABS module and factory braking system configuration.
7. Will this module fit a front-wheel-drive Jeep Compass?
Compatibility with specific front-wheel-drive configurations has not been independently verified.
8. Will this module fit a four-wheel-drive Jeep Compass?
Compatibility with specific four-wheel-drive configurations has not been independently verified.
9. Will this ABS module fit a 2016 Jeep Patriot?
The supplied description mentions Jeep Patriot applications, but exact compatibility with 68212478AB has not been established. Verify fitment separately.
10. Is this a genuine OEM ABS module?
The supplied listing advertises it as OEM, but authenticity has not been independently verified.
11. Is this ABS module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
12. Is VIN programming available?
Vehicle-specific VIN programming is offered. Confirm programming details before ordering.
13. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the procedure with the installing technician.
14. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes, although wheel speed sensors, wiring, voltage problems, and other faults may cause similar symptoms.
15. Does the replacement include the complete ABS hydraulic pump assembly?
The supplied information does not confirm whether the complete assembly is included.
16. Is professional installation recommended?
Yes. ABS module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2016 Jeep Compass ABS Pump Control Module
Get your 2016 Jeep Compass ABS Pump Control Module 68212478AB, advertised as an OEM replacement for select applications without Hill Start Assist.
ABS Pump Control Module | Without Hill Start Assist | VIN Programming Available
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle is equipped without Hill Start Assist.
-
Verify compatibility if purchasing for a Jeep Patriot.
-
Confirm the condition and included components of the replacement.
-
Arrange professional installation and any required ABS initialization.
IMPORTANT: PART NUMBER 68212478AB IS ADVERTISED FOR APPLICATIONS WITHOUT HILL START ASSIST. VERIFY YOUR VEHICLE'S FACTORY CONFIGURATION BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.