2014–2017 Jeep ABS Control Module 68223570 | VIN Programmed
- $499.00
-
Regular price
$1,312.50 -
-61%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2014–2017 Jeep ABS Control Module 68223570 | VIN Programmed
2014–2017 Jeep ABS Control Module – 68223570AB
VIN Programmed | Anti-Lock Brake System Control Module | Select Jeep Applications
Replace a faulty ABS control module with the 2014–2017 Jeep ABS Control Module 68223570AB.
This replacement module is advertised for select 2014, 2015, 2016, and 2017 Jeep vehicles experiencing ABS warning lights, traction control problems, electronic stability control faults, or communication issues with the anti-lock braking system.
The ABS control module monitors wheel speed information and coordinates anti-lock braking functions. Depending on the vehicle's factory equipment, it also supports traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
Key Features
-
Advertised Model Years: 2014–2017
-
Vehicle Make: Jeep
-
Primary Part Number: 68223570AB
-
Component Type: ABS Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
ABS Function: Supports applicable factory anti-lock braking functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
Select 2014–2017 Jeep Vehicles
-
2014 Jeep — specific model and configuration to be confirmed
-
2015 Jeep — specific model and configuration to be confirmed
-
2016 Jeep — specific model and configuration to be confirmed
-
2017 Jeep — specific model and configuration to be confirmed
Important: The supplied product information identifies Jeep as the manufacturer but does not specify a vehicle model.
Compatibility with a particular Jeep Wrangler, Cherokee, Grand Cherokee, Compass, Patriot, or other Jeep model has not been established from the supplied information.
Verify fitment using your vehicle's VIN, original ABS module part number, and factory braking system configuration.
Part Number Information
Primary Part Number
-
68223570AB
Additional part-number revisions or supersessions have not been supplied and should not be assumed interchangeable.
Confirm the original ABS module part number before ordering.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Drivetrain configuration, if applicable
-
Stored diagnostic trouble codes, if available
Additional vehicle-specific configuration, initialization, or calibration may be required after installation.
Common Jeep ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
ABS pump motor circuit faults
-
Internal ABS module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent or inaccurate speedometer readings
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS control module.
Common ABS Diagnostic Trouble Codes
C2116 – ABS Pump Motor or Supply Voltage Fault
May indicate an ABS pump motor circuit problem or electrical supply issue in applicable systems.
C2200 – ABS Control Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – ABS Control Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Control Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These are general ABS diagnostic references, not confirmed fault codes for part number 68223570AB. Code applicability and definitions must be checked using vehicle-specific service information.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure control
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
A properly functioning ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number
-
Installing the compatible replacement module
-
Confirming VIN programming and configuration
-
Performing required ABS initialization or calibration
-
Bleeding the hydraulic brake system if necessary
-
Clearing stored diagnostic trouble codes
-
Testing ABS, traction control, and stability control operation
VIN programming does not guarantee plug-and-play installation.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. What is the full ABS module part number?
The primary part number is 68223570AB.
2. What vehicles does ABS module 68223570AB fit?
It is advertised for select 2014–2017 Jeep applications. The exact Jeep model and configuration still need verification.
3. Will this module fit my 2014 Jeep?
Compatibility depends on the specific Jeep model, original module number, and factory braking system.
4. Is this ABS module compatible with a 2015 Jeep?
The advertised range includes 2015, but exact compatibility must be confirmed.
5. Will this ABS module fit a 2016 Jeep?
The listing includes 2016 Jeep vehicles, subject to model and part-number verification.
6. Is it compatible with a 2017 Jeep?
The advertised range includes 2017. Verify the original module number before ordering.
7. Does this ABS module fit a Jeep Wrangler?
Wrangler compatibility has not been established from the supplied information.
8. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
9. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
10. Is this ABS module plug-and-play?
Not necessarily. Additional configuration or calibration may be required after installation.
11. Can a faulty ABS module illuminate the traction control light?
Yes. ABS system faults can affect applicable traction control and stability control functions.
12. What does C2200 mean?
In applicable systems, it may indicate an internal ABS control module fault.
13. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
Order Your 2014–2017 Jeep ABS Control Module
Get your Jeep ABS Control Module 68223570AB, VIN programmed for your vehicle.
VIN Programmed | ABS Control Module | Select 2014–2017 Jeep Applications
Provide your VIN and original ABS module part number to confirm compatibility before ordering.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.