2013 Dodge Ram 1500 ABS Control Module P68204659 | VIN Programmed
- $950.00
-
Regular price
$1,312.50 -
-27%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2013 Dodge Ram 1500 ABS Control Module P68204659 | VIN Programmed
2013 Dodge Ram 1500 ABS Control Module – P68204659AA
Anti-Lock Brake System Control Module | VIN Programmed | Special Order Part
Replace a malfunctioning anti-lock braking system controller with the 2013 Dodge Ram 1500 ABS Control Module P68204659AA from Auto Computer Performance.
This replacement ABS control module is advertised for select 2013 Dodge Ram 1500 trucks equipped with a compatible factory anti-lock braking system.
The ABS control module processes wheel speed sensor information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
This module is offered with vehicle-specific VIN programming.
SPECIAL ORDER PART — ALLOW UP TO TWO WEEKS FOR ORDER PROCESSING.
Due to limited availability, this ABS module requires additional processing time. The stated processing period is separate from any shipping transit time.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER AND VIN BEFORE ORDERING.
Key Features
-
Advertised Vehicle: 2013 Dodge Ram 1500
-
Primary Part Number: P68204659AA
-
Additional Listed Part Number: 68204659AA
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Vehicle-specific programming offered
-
Availability: Special order
-
Processing Time: Up to two weeks
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed information
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2013 Dodge Ram 1500
-
2013 Dodge Ram 1500 — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Two-wheel drive or four-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2013 Dodge Ram 1500 necessarily uses the same ABS control module.
Compatibility with every engine, trim level, drivetrain, or factory braking system configuration has not been independently verified.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
P68204659AA
Additional Listed Part Number
-
68204659AA
The supplied product information lists both P68204659AA and 68204659AA for this ABS control module.
These references share the same numeric part number, with one version including the leading P.
The supplied listing does not identify any additional supersession or interchangeable replacement part numbers.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
Special Order ABS Control Module
THIS IS A SPECIAL ORDER PART.
The supplied product information states that P68204659AA has limited availability and requires additional processing time.
Special Order Details
-
Part Number: P68204659AA
-
Vehicle: 2013 Dodge Ram 1500
-
Order Type: Special order
-
Availability: Limited supply
-
Processing Time: Up to two weeks
Please allow up to two weeks for order processing before shipment.
Processing time is not the same as shipping transit time.
Customers should account for this additional lead time when scheduling vehicle repairs.
Replacement ABS Control Module
The 2013 Dodge Ram 1500 ABS Control Module P68204659AA is advertised as a replacement for a compatible factory ABS controller.
A properly matched ABS control module is designed to communicate with the vehicle's braking system and support its factory anti-lock braking functions.
The supplied listing describes the product as genuine OEM and high quality. However, original-equipment authenticity, manufacturing source, component condition, and testing results have not been independently verified.
Confirm whether the replacement is new, used, or remanufactured before ordering.
VIN Programming
This ABS control module is offered with vehicle-specific VIN programming.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Drivetrain configuration
-
Factory braking system configuration
-
Stored diagnostic trouble codes, if available
Provide your 17-digit VIN when ordering so the vehicle configuration can be checked.
Depending on the vehicle and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2013 Dodge Ram 1500 ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
ABS pump running continuously
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent braking system warning lights
-
Loss of anti-lock braking functionality
Diagnostic Note: These are general ABS-related symptoms, not confirmed faults specific to part number P68204659AA.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, insufficient electrical supply voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The supplied product information does not identify specific diagnostic trouble codes for this module.
The following are general ABS diagnostic examples, not verified fault codes for part number P68204659AA.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that ABS module P68204659AA has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
ABS pump motor control
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Confirm compatibility with the vehicle's factory braking system.
-
Install the replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P68204659AA fit my 2013 Dodge Ram 1500?
It is advertised for select 2013 Dodge Ram 1500 vehicles. Confirm compatibility using your original ABS module number and VIN.
2. What is the full ABS module part number?
The primary part number is P68204659AA.
3. Is 68204659AA the same part-number reference as P68204659AA?
Both formats appear in the supplied listing. One includes the leading P prefix.
4. Does this module fit every 2013 Dodge Ram 1500 trim?
Not necessarily. Fitment depends on the original ABS module and factory braking system configuration.
5. Will this ABS module fit a 2WD Ram 1500?
Compatibility with specific two-wheel-drive configurations has not been independently verified.
6. Will this ABS module fit a 4WD Ram 1500?
Compatibility with specific four-wheel-drive configurations has not been independently verified.
7. Is this ABS module a special order part?
Yes. The supplied listing explicitly identifies P68204659AA as a special order part.
8. How long does special order processing take?
The stated processing time is up to two weeks.
9. Does the two-week processing time include shipping?
The supplied listing specifies processing time, not shipping transit time. Allow additional time for delivery.
10. Is this a genuine OEM ABS module?
The supplied listing describes it as genuine OEM, but original-equipment authenticity has not been independently verified.
11. Is this module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
12. Is this ABS module VIN programmed?
Vehicle-specific VIN programming is offered. Confirm the programming details when placing your order.
13. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the vehicle-specific procedure with the installing technician.
14. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes. ABS controller faults may illuminate the ABS warning light, although other braking system problems can produce similar symptoms.
15. Is professional installation recommended?
Yes. ABS control module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2013 Dodge Ram 1500 ABS Control Module
Get your 2013 Dodge Ram 1500 ABS Control Module P68204659AA, offered with vehicle-specific VIN programming.
ABS Control Module | VIN Programmed | Special Order Part
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's factory braking system configuration.
-
Confirm the condition and included components of the replacement unit.
-
Allow up to two weeks for special order processing.
-
Arrange for any required ABS initialization or calibration after installation.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.