2013–2014 Dodge Charger & Chrysler 300 ABS Control Module 68195728 | VIN Programmed
- $1,150.00
-
Regular price
$1,312.50 -
-12%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2013–2014 Dodge Charger & Chrysler 300 ABS Control Module 68195728 | VIN Programmed
2013–2014 Dodge Charger & Chrysler 300 ABS Control Module – 68195728AA
VIN Programmed | Anti-Lock Brake System Control Module | Part Number 68195728AA
Replace a malfunctioning anti-lock braking system controller with the 2013–2014 Dodge Charger and Chrysler 300 ABS Control Module 68195728AA.
This replacement ABS control module is advertised for select 2013 and 2014 Dodge Charger and 2013 and 2014 Chrysler 300 vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicles: Dodge Charger and Chrysler 300
-
Advertised Model Years: 2013–2014
-
Primary Part Number: 68195728AA
-
Additional Listed Part Number: 68210120AB
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2013–2014 Dodge Charger
-
2013 Dodge Charger — select configurations
-
2014 Dodge Charger — select configurations
2013–2014 Chrysler 300
-
2013 Chrysler 300 — select configurations
-
2014 Chrysler 300 — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Rear-wheel drive or all-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2013–2014 Dodge Charger or Chrysler 300 necessarily uses the same ABS control module.
The supplied listing also contains a broader reference to 2011–2013 Chrysler/Dodge, but its specific vehicle compatibility entries identify the 2013–2014 Dodge Charger and Chrysler 300. The advertised fitment above follows those specific entries.
Compatibility with every engine, trim level, or drivetrain configuration has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68195728AA
Additional Listed Part Number
-
68210120AB
The supplied product information associates 68195728AA and 68210120AB with this listing.
However, it does not explicitly establish whether 68210120AB is a supersession, replacement, or interchangeable alternative to 68195728AA.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and drivetrain configuration
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common Dodge Charger & Chrysler 300 ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Wheel speed sensor-related warning lights
-
Intermittent or inaccurate speedometer readings
-
Speedometer not functioning
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The following codes were supplied as diagnostic references for this product listing.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that part number 68195728AA has failed. Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Install the compatible replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.