2013–2014 Dodge Charger ABS Pump Control Module 68224181 | VIN Programmed
- $599.00
-
Regular price
$1,312.50 -
-54%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2013–2014 Dodge Charger ABS Pump Control Module 68224181 | VIN Programmed
2013–2014 Dodge Charger ABS Pump Control Module – 68224181AB
Anti-Lock Brake System (ABS) Module | VIN Programmed | Part Number 68224181AB
Replace a malfunctioning anti-lock braking system component with the 2013–2014 Dodge Charger ABS Pump Control Module 68224181AB from Auto Computer Performance.
This replacement ABS module is advertised for select 2013 and 2014 Dodge Charger vehicles experiencing ABS warning lights, traction control problems, ABS pump faults, communication errors, or intermittent braking system issues.
The ABS control system processes wheel speed information and helps regulate brake pressure during anti-lock braking events. Depending on the vehicle's factory equipment, it may also support traction control and electronic stability control.
The supplied listing identifies 68224181AB as an OEM anti-lock brake assembly pump module and includes the additional part-number references P68224181AB and 04779789AF.
This replacement is offered with vehicle-specific VIN programming.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS PART NUMBER AND VIN BEFORE ORDERING.
Key Features
-
Advertised Vehicle: Dodge Charger
-
Advertised Model Years: 2013–2014
-
Primary Part Number: 68224181AB
-
Additional Listed Numbers: P68224181AB, 04779789AF
-
Component Type: ABS Pump / Control Module Assembly
-
OEM Identification: Advertised as OEM
-
VIN Programming: Vehicle-specific programming offered
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed sensor information
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2013 Dodge Charger
-
2013 Dodge Charger — select configurations
2014 Dodge Charger
-
2014 Dodge Charger — select configurations
The supplied product information lists both model years as compatible applications.
Exact fitment may depend on:
-
Original ABS pump or control module part number
-
Engine configuration
-
Rear-wheel drive or all-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2013–2014 Dodge Charger necessarily uses the same ABS module.
Compatibility with every engine, trim level, drivetrain, or factory braking system configuration has not been independently verified.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68224181AB
Additional Listed Part Numbers
-
P68224181AB
-
04779789AF
The supplied product information associates all three part-number references with this ABS module listing.
68224181AB and P68224181AB share the same numeric identifier, with the second format including a leading P.
The separate number 04779789AF is also listed, but the source does not specify whether it is a supersession, replacement, or alternate component identifier.
Important: Confirm compatibility using the original ABS module number and vehicle VIN before ordering. Do not assume that all listed numbers are interchangeable for every 2013–2014 Dodge Charger.
Replacement ABS Pump Control Module
The 2013–2014 Dodge Charger ABS Pump Control Module 68224181AB is advertised as a replacement for a compatible factory ABS component.
A properly matched ABS module is designed to communicate with the vehicle's braking system and support its factory anti-lock braking functions.
The supplied listing describes the product as genuine OEM. However, original-equipment authenticity, manufacturing source, component condition, and testing results have not been independently verified.
Confirm whether the specific replacement is new, used, or remanufactured before ordering.
VIN Programming
This ABS module is offered with vehicle-specific VIN programming.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Drivetrain configuration
-
Factory braking system configuration
-
Stored diagnostic trouble codes, if available
Provide your 17-digit VIN when ordering so the correct vehicle configuration can be checked.
Depending on the vehicle and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2013–2014 Dodge Charger ABS Module Problems
The supplied product information identifies the following potential ABS-related symptoms:
-
ABS pump constantly running
-
Communication issues
-
Communication problems with a diagnostic scanner
-
Intermittent electrical power loss
-
Intermittent ABS functionality
-
No communication with the ABS module
-
Intermittent or non-functioning speedometer
-
Random or inaccurate speedometer readings
-
Speedometer not working
-
Solenoid valve malfunction
-
Wheel speed sensor diagnostic codes
-
Wheel speed sensor-related issues
-
Loss of ABS-assisted braking
-
Traction control warning light illuminated
Other general ABS-related symptoms may include:
-
ABS warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
Intermittent braking system warning lights
-
Loss of anti-lock braking functionality
Diagnostic Note: These are potential ABS-related symptoms, not independently confirmed failures specific to part number 68224181AB.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, insufficient electrical supply voltage, poor electrical connections, or other braking system components.
Speedometer problems may also originate outside the ABS control module.
An illuminated ABS warning light does not necessarily mean the ABS module has failed.
Proper diagnosis is recommended before replacing the component.
Common ABS Diagnostic Trouble Codes
The following diagnostic trouble codes were supplied with this product listing.
C2116 – Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that ABS module 68224181AB has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Pump Control Module Functions
Depending on factory equipment, the ABS system supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
ABS pump motor control
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
-
Communication with other vehicle control modules
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS pump or control module part number.
-
Confirm compatibility with the vehicle's factory braking system.
-
Install the appropriate replacement component.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: Although the supplied listing describes an ABS assembly pump module, it does not establish whether the product includes the hydraulic pump, electronic controller, or complete assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68224181AB fit my 2013 Dodge Charger?
It is advertised for select 2013 Dodge Charger vehicles. Confirm compatibility using your original ABS module number and VIN.
2. Will ABS module 68224181AB fit my 2014 Dodge Charger?
The 2014 Dodge Charger is included in the advertised application. Exact fitment requires verification.
3. What is the primary ABS module part number?
The primary part number is 68224181AB.
4. Is P68224181AB the same part-number reference as 68224181AB?
Both formats appear in the supplied listing. One includes the leading P prefix.
5. Is 04779789AF interchangeable with 68224181AB?
The supplied listing associates these numbers, but their precise interchangeability has not been independently verified.
6. Is 04779789AF a supersession of 68224181AB?
The supplied product information does not establish a verified supersession relationship.
7. Does this ABS module fit every 2013–2014 Dodge Charger trim?
Not necessarily. Fitment depends on the original ABS module and factory braking system configuration.
8. Will this ABS module fit rear-wheel-drive Dodge Charger models?
Compatibility with specific rear-wheel-drive configurations has not been independently verified.
9. Will this ABS module fit all-wheel-drive Dodge Charger models?
Compatibility with specific all-wheel-drive configurations has not been independently verified.
10. Is this a genuine OEM ABS module?
The supplied listing describes it as OEM, but original-equipment authenticity has not been independently verified.
11. Is this module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
12. Is this ABS module VIN programmed?
Vehicle-specific VIN programming is offered. Confirm the programming details when placing your order.
13. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the vehicle-specific procedure with the installing technician.
14. What do C2116, C2200, and U0121 indicate?
These codes may relate to ABS pump motor electrical faults, internal controller faults, or lost communication with the ABS module. They do not independently establish that the module needs replacement.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.