2013–2014 Chrysler 300 ABS Control Module 68210119AB |Vin Programmed
- $699.00
-
Regular price
$1,312.50 -
-46%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2013–2014 Chrysler 300 ABS Control Module 68210119AB |Vin Programmed
2013–2014 Chrysler 300 ABS Control Module – 68210119AB
Remanufactured ABS Pump Control Module | Pre-Programmed | ABS Initialization Required After Installation
Restore the proper operation of your vehicle's anti-lock braking system with the 2013–2014 Chrysler 300 ABS Control Module 68210119AB from Auto Computer Performance.
This replacement ABS module is advertised for select 2013 and 2014 Chrysler 300 vehicles equipped with a compatible factory anti-lock braking system.
The ABS control module processes wheel speed information and coordinates braking system functions that help prevent wheel lockup during hard braking. Depending on factory equipment, it may also support traction control and electronic stability control.
According to the supplied product information, this module is professionally refurbished, tested, and pre-programmed before shipping.
IMPORTANT: ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Although the module arrives pre-programmed, it is not a completely plug-and-play replacement. A qualified technician must perform the required ABS initialization procedure after installation.
Key Features
-
Vehicle Compatibility: 2013–2014 Chrysler 300, select configurations
-
Primary Part Number: 68210119AB
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
Condition: Professionally refurbished, according to the supplied listing
-
Programming: Pre-programmed before shipping
-
Post-Installation Requirement: ABS initialization required
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed sensor information
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Original part number and VIN recommended
Vehicle Compatibility
2013 Chrysler 300
-
2013 Chrysler 300 — select configurations
2014 Chrysler 300
-
2014 Chrysler 300 — select configurations
The supplied product information lists both model years.
Exact compatibility may depend on:
-
Original ABS control module part number
-
Vehicle VIN
-
Engine configuration
-
Rear-wheel drive or all-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
Important: Not every 2013–2014 Chrysler 300 necessarily uses the same ABS control module.
Before ordering, confirm that the part number on your original module matches 68210119AB, or have compatibility verified using your VIN.
Part Numbers and Cross-References
Primary OEM Part Number
68210119AB
The supplied listing identifies 68210119AB as the ABS module part number.
No additional verified supersession or interchangeable replacement part numbers were supplied.
Do not assume that a similar-looking ABS module or a different suffix revision is compatible without confirming the original part number and vehicle configuration.
Remanufactured ABS Control Module
According to the supplied product description, each 68210119AB ABS module is:
-
Professionally refurbished
-
Thoroughly tested
-
Updated with OEM software
-
Restored toward factory operating specifications
-
Pre-programmed before shipping
These are seller-provided product claims; the specific refurbishment procedures, software versions, testing documentation, and resulting performance have not been independently verified.
A properly functioning ABS control module is intended to communicate with the vehicle's braking system and support its factory anti-lock braking functions.
Pre-Programmed ABS Control Module
The supplied listing states that every 68210119AB ABS module is professionally pre-programmed before shipping.
Pre-programming may reduce the amount of configuration work needed during installation.
However, pre-programming and post-installation ABS initialization are separate procedures.
Information Recommended Before Ordering
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Drivetrain configuration
-
Factory braking system equipment
-
Stored diagnostic trouble codes, if available
Provide your VIN and original module part number for fitment verification.
ABS Initialization Required After Installation
ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
This requirement is explicitly stated in the supplied product information.
Even though the module arrives pre-programmed, the vehicle must undergo the appropriate ABS initialization procedure after the replacement is installed.
Depending on the vehicle configuration and repair procedure, a qualified technician may also need to:
-
Confirm the ABS module configuration
-
Perform applicable brake system calibration procedures
-
Clear stored diagnostic trouble codes
-
Verify communication with other vehicle control modules
-
Perform hydraulic brake bleeding if the system was opened
-
Confirm ABS and traction control operation
Do not assume the vehicle is ready for normal driving immediately after installing the module.
Proper initialization and verification of braking system operation are essential.
Common 2013–2014 Chrysler 300 ABS Module Problems
The supplied listing identifies the following potential ABS-related symptoms:
-
ABS pump running continuously
-
Communication problems with the ABS module
-
Diagnostic scanner unable to communicate with the module
-
Intermittent electrical power loss
-
Intermittent ABS operation
-
No communication with the ABS controller
-
Intermittent or non-functioning speedometer
-
Random or inaccurate speedometer readings
-
Solenoid valve malfunction
-
Wheel speed sensor diagnostic codes
-
Wheel speed sensor-related problems
-
Loss of ABS-assisted braking
-
Traction control warning light illuminated
Other general symptoms may include:
-
ABS warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor faults
-
Intermittent braking system warning lights
Diagnostic Note: These symptoms do not independently confirm that module 68210119AB is defective.
Similar problems may result from wheel speed sensors, wiring, low supply voltage, poor electrical connections, or other braking system components.
Speedometer problems may also have causes outside the ABS module.
A proper diagnostic evaluation is recommended before replacement.
Common ABS Diagnostic Trouble Codes
The supplied product information associates the following diagnostic trouble codes with ABS module problems.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor electrical problem or insufficient supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic fault within an ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes are listed in the supplied product information but are not independently verified as faults specific to 68210119AB.
A diagnostic trouble code alone does not establish that the ABS control module requires replacement.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Brake pressure regulation
-
ABS pump motor control
-
Traction control
-
Electronic stability control
-
ABS diagnostic monitoring
-
Communication with other vehicle control modules
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Recommended Installation Procedure
-
Confirm that the original ABS module part number is 68210119AB.
-
Verify compatibility with the vehicle's VIN and factory braking system.
-
Install the replacement ABS control module.
-
Confirm the supplied pre-programmed configuration.
-
Perform the required ABS initialization procedure.
-
Complete any additional vehicle-specific calibration procedures.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
-
Confirm proper braking system operation before returning the vehicle to service.
Important: The supplied listing refers to both an ABS pump module and an ABS control module. It does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm exactly which components are included before ordering.
Frequently Asked Questions
1. What is the 68210119AB ABS module?
It is an anti-lock brake system control module advertised for select 2013–2014 Chrysler 300 vehicles.
2. Will 68210119AB fit my 2013 Chrysler 300?
The supplied listing includes the 2013 Chrysler 300. Confirm your original module part number and VIN before ordering.
3. Will 68210119AB fit my 2014 Chrysler 300?
The supplied listing includes the 2014 Chrysler 300. Exact fitment depends on the factory braking system configuration.
4. What is the primary part number?
The primary part number is 68210119AB.
5. Is this a genuine OEM ABS module?
The supplied listing describes it as genuine OEM. Original-equipment authenticity has not been independently verified.
6. Is this ABS module remanufactured?
The supplied product information describes the module as professionally refurbished and tested.
7. Is the module tested before shipping?
The seller states that modules are thoroughly tested. Specific testing records have not been independently reviewed.
8. Is the ABS module pre-programmed?
Yes. The supplied listing states that the module is professionally pre-programmed before shipping.
9. Does this module require programming after installation?
The module is advertised as pre-programmed, but ABS initialization is still required after installation. Additional configuration may depend on the vehicle.
10. Is ABS initialization required?
Yes. ABS initialization after installation is explicitly required in the supplied product information.
11. Is this module plug-and-play?
No. The required ABS initialization procedure must be completed after installation.
12. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes, although wheel speed sensors, wiring, hydraulic components, and other faults may cause similar symptoms.
13. What does diagnostic code C2200 mean?
The supplied listing associates C2200 with an internal ABS module fault. Confirm the code's definition using vehicle-specific diagnostic information.
14. What does U0121 mean?
U0121 generally indicates lost communication with the ABS control module. Electrical or network problems should be investigated before replacing the controller.
15. Is professional installation recommended?
Yes. Installation requires ABS initialization and may require specialized diagnostic equipment and brake system procedures.
Order Your 2013–2014 Chrysler 300 ABS Control Module
Get your 2013–2014 Chrysler 300 ABS Control Module 68210119AB, advertised as professionally refurbished and pre-programmed.
Remanufactured ABS Module | Pre-Programmed | ABS Initialization Required
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN for compatibility verification.
-
Confirm whether the replacement includes the electronic module or complete ABS pump assembly.
-
Arrange professional installation.
-
Ensure the required ABS initialization is performed after installation.
IMPORTANT: PRE-PROGRAMMED DOES NOT MEAN PLUG-AND-PLAY. ABS INITIALIZATION IS REQUIRED.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.