2012 Dodge Charger & Chrysler 300 ABS Control Module 68160269 | VIN Programmed
- $699.00
-
Regular price
$1,312.50 -
-46%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2012 Dodge Charger & Chrysler 300 ABS Control Module 68160269 | VIN Programmed
2012 Dodge Charger & Chrysler 300 ABS Control Module – 68160269AB
VIN Programmed | Anti-Lock Brake System Control Module | Replaces 68154644AA
Replace a malfunctioning ABS controller with the 2012 Dodge Charger and Chrysler 300 ABS Control Module 68160269AB.
This replacement anti-lock brake control module is advertised for select 2012 Dodge Charger and 2012 Chrysler 300 vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicles: 2012 Dodge Charger and 2012 Chrysler 300
-
Primary Part Number: 68160269AB
-
Listed Replacement Number: 68154644AA
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2012 Dodge Charger
-
2012 Dodge Charger — select configurations
2012 Chrysler 300
-
2012 Chrysler 300 — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Rear-wheel drive or all-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2012 Dodge Charger or Chrysler 300 necessarily uses the same ABS control module.
Compatibility with every engine, trim level, and drivetrain configuration has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68160269AB
Listed Replacement Part Number
-
68154644AA
The supplied product information identifies 68160269AB as the primary part number and lists it as a replacement for 68154644AA.
This replacement relationship is based on the supplied listing and has not been independently verified for every vehicle configuration.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and drivetrain configuration
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common Dodge Charger & Chrysler 300 ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Wheel speed sensor-related warning lights
-
Intermittent or inaccurate speedometer readings
-
Speedometer not functioning
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The following codes were supplied as diagnostic references for this product listing.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that part number 68160269AB has failed. Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number.
-
Installing the compatible replacement ABS control module.
-
Confirming VIN programming and vehicle configuration.
-
Performing required ABS initialization or calibration.
-
Bleeding the hydraulic brake system if necessary.
-
Clearing stored diagnostic trouble codes.
-
Testing ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68160269AB fit my 2012 Dodge Charger?
It is advertised for select 2012 Dodge Charger vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. Will this ABS module fit my 2012 Chrysler 300?
The 2012 Chrysler 300 is included in the advertised application. Exact fitment requires verification.
3. What is the full ABS module part number?
The primary part number is 68160269AB.
4. Does 68160269AB replace 68154644AA?
The supplied product listing identifies 68160269AB as replacing 68154644AA. Confirm the replacement relationship for your specific vehicle before ordering.
5. Does this ABS module fit every 2012 Dodge Charger trim?
Not necessarily. Fitment may vary according to the original ABS module and factory braking system configuration.
6. Does this module fit every 2012 Chrysler 300 trim?
Compatibility with every Chrysler 300 trim and engine configuration has not been established.
7. Does this ABS module fit both RWD and AWD vehicles?
Compatibility with both drivetrain configurations has not been independently confirmed.
8. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
9. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
10. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
11. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control and electronic stability control functions.
12. What does C2116 mean?
It may indicate an ABS pump motor circuit fault or insufficient pump supply voltage.
13. What does C2200 mean?
It may indicate an internal ABS control module fault.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. ABS module installation may require specialized diagnostic equipment and braking system procedures.
Order Your 2012 Dodge Charger or Chrysler 300 ABS Control Module
Get your 2012 Dodge Charger or Chrysler 300 ABS Control Module 68160269AB, VIN programmed for your vehicle.
VIN Programmed | ABS Control Module | Select 2012 Dodge Charger and Chrysler 300 Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's engine and drivetrain configuration.
-
Verify the listed replacement relationship if your original module is 68154644AA.
-
Arrange for any required ABS setup or calibration after installation.
PART NUMBER VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.