2012 Chrysler 300 & Dodge Charger ABS Control Module 68154644 | VIN Programmed
- $599.00
-
Regular price
$1,312.50 -
-54%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2012 Chrysler 300 & Dodge Charger ABS Control Module 68154644 | VIN Programmed
2012 Chrysler 300 & Dodge Charger ABS Control Module – 68154644AA
Anti-Lock Brake System (ABS) Control Module | VIN Programming Available | Part Number 68154644AA
Replace a malfunctioning anti-lock braking system controller with the 2012 Chrysler 300 and Dodge Charger ABS Control Module 68154644AA from Auto Computer Performance.
This ABS control module is advertised for select 2012 Chrysler 300 and 2012 Dodge Charger vehicles equipped with a compatible factory anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
The supplied product information identifies 68154644AA as the primary part number and references several additional numbers in the accompanying image link.
Vehicle-specific VIN programming is offered. Additional ABS initialization or calibration may be required after installation.
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER AND VIN BEFORE ORDERING.
Key Features
-
Advertised Vehicles: 2012 Chrysler 300 and 2012 Dodge Charger
-
Primary Part Number: 68154644AA
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Vehicle-specific programming offered
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed sensor information
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Diagnostic References: C2116, C2200, C2200-49, U0121
-
Fitment Verification: Original part number and VIN recommended
Vehicle Compatibility
2012 Chrysler 300
-
2012 Chrysler 300 — select configurations
2012 Dodge Charger
-
2012 Dodge Charger — select configurations
Exact compatibility may depend on:
-
Original ABS module part number
-
Vehicle VIN
-
Engine configuration
-
Rear-wheel drive or all-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
Important: Not every 2012 Chrysler 300 or Dodge Charger necessarily uses the same ABS control module.
Compatibility with every trim, engine, drivetrain, or factory braking system configuration has not been independently verified.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
68154644AA
Additional Numbers Referenced in the Supplied Image Link
-
04584548AG
-
68154622AB
-
68154622AA
These additional numbers appear in the text associated with the supplied product image.
However, the source does not establish whether they are confirmed replacements, supersessions, or interchangeable alternatives to 68154644AA.
Important: Do not assume that every number appearing in the image link is compatible with your vehicle.
Confirm the original ABS module part number and vehicle VIN before ordering.
Replacement ABS Control Module
The 2012 Chrysler 300 / Dodge Charger ABS Control Module 68154644AA is advertised as a replacement for a compatible factory ABS controller.
A properly matched ABS control module is designed to communicate with the vehicle's braking system and support its factory anti-lock braking functions.
The supplied product information does not specify whether this particular module is new, used, repaired, or remanufactured.
Confirm the condition, included components, and applicable service arrangement before ordering.
VIN Programming
Vehicle-specific VIN programming is offered for this ABS control module.
Recommended Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Drivetrain configuration
-
Factory braking system equipment
-
Stored diagnostic trouble codes, if available
Providing your VIN and original module part number helps support compatibility verification.
Depending on the vehicle and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2012 Chrysler 300 & Dodge Charger ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
ABS pump running continuously
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent braking system warning lights
-
Loss of anti-lock braking functionality
Diagnostic Note: These are general ABS-related symptoms, not confirmed failures specific to part number 68154644AA.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, insufficient electrical supply voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The following diagnostic trouble codes were supplied with this product listing.
C2116 – Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor electrical problem or insufficient pump supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within an ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These diagnostic trouble codes are associated with the supplied product information but have not been independently verified as faults specific to 68154644AA.
A diagnostic trouble code alone does not establish that the ABS control module requires replacement.
Vehicle-specific diagnostic procedures should be followed before ordering.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
ABS pump motor control
-
Traction control
-
Electronic stability control
-
ABS diagnostic monitoring
-
Communication with other vehicle control modules
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Recommended Installation Procedure
-
Verify the original ABS module part number.
-
Confirm compatibility with the vehicle's factory braking system.
-
Install the replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the product includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68154644AA fit my 2012 Chrysler 300?
The supplied listing includes the 2012 Chrysler 300. Confirm compatibility using your original ABS module number and VIN.
2. Will ABS module 68154644AA fit my 2012 Dodge Charger?
The supplied listing includes the 2012 Dodge Charger. Exact fitment requires verification.
3. What is the primary ABS module part number?
The primary part number is 68154644AA.
4. Is 04584548AG interchangeable with 68154644AA?
The supplied image link references 04584548AG, but interchangeability has not been established.
5. Is 68154622AB compatible with 68154644AA?
The number appears in the supplied image link. Confirm compatibility before ordering.
6. Is 68154622AA compatible with 68154644AA?
The supplied image link references this number, but confirmed interchangeability has not been established.
7. Are these additional numbers confirmed supersessions?
No verified supersession relationship was supplied.
8. Does this module fit every 2012 Chrysler 300 or Dodge Charger trim?
Not necessarily. Compatibility depends on the original ABS module and factory braking system configuration.
9. Will this ABS module fit rear-wheel-drive vehicles?
Compatibility with specific rear-wheel-drive configurations has not been independently verified.
10. Will this ABS module fit all-wheel-drive vehicles?
Compatibility with specific all-wheel-drive configurations has not been independently verified.
11. Is this ABS module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
12. Is VIN programming available?
Vehicle-specific VIN programming is offered. Confirm the programming details before ordering.
13. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the vehicle-specific procedure with the installing technician.
14. What do C2116, C2200, and U0121 indicate?
The supplied listing associates these codes with ABS pump motor faults, internal controller faults, and lost communication with the ABS module. Their presence does not independently establish that the module needs replacement.
15. Is professional installation recommended?
Yes. ABS module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2012 Chrysler 300 / Dodge Charger ABS Control Module
Get your 2012 Chrysler 300 or Dodge Charger ABS Control Module 68154644AA, with vehicle-specific VIN programming offered.
ABS Control Module | VIN Programming Available | Select 2012 Chrysler 300 & Dodge Charger Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's factory braking system configuration.
-
Verify compatibility if your original module carries a different part number.
-
Confirm the condition and included components of the replacement unit.
-
Arrange professional installation and any required ABS initialization.
IMPORTANT: VERIFY PART NUMBER 68154644AA AND VEHICLE COMPATIBILITY BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.