2012–2017 Chevy Equinox & GMC Terrain ABS Control Module | VIN Programmed
- $599.00
-
Regular price
$1,312.50 -
-54%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2012–2017 Chevy Equinox & GMC Terrain ABS Control Module | VIN Programmed
2012–2017 Chevy Equinox & GMC Terrain ABS Control Module
VIN Programmed | Anti-Lock Brake System Control Module | ABS Module Replacement
Replace a malfunctioning ABS controller with a 2012–2017 Chevrolet Equinox or GMC Terrain ABS Control Module, programmed using your vehicle's VIN.
This replacement ABS control module is advertised for select 2012–2017 Chevy Equinox and GMC Terrain vehicles experiencing ABS warning lights, traction control problems, electronic stability control warnings, or communication faults involving the braking system.
The ABS control module helps coordinate anti-lock braking functions by processing wheel speed information. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicles: Chevrolet Equinox and GMC Terrain
-
Advertised Model Years: 2012–2017
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
Chevrolet Equinox
-
2012 Chevrolet Equinox
-
2013 Chevrolet Equinox
-
2014 Chevrolet Equinox
-
2015 Chevrolet Equinox
-
2016 Chevrolet Equinox
-
2017 Chevrolet Equinox
GMC Terrain
-
2012 GMC Terrain
-
2013 GMC Terrain
-
2014 GMC Terrain
-
2015 GMC Terrain
-
2016 GMC Terrain
-
2017 GMC Terrain
Important: These are the advertised model years. Compatibility with every year, trim, engine, drivetrain, or factory braking system configuration has not been independently verified.
ABS module configurations may vary depending on:
-
Original ABS module part number
-
Engine configuration
-
Front-wheel drive or all-wheel drive
-
Factory braking system equipment
-
Vehicle VIN
Verify your original ABS module part number and VIN before ordering.
ABS Control Module Part Numbers
The following part numbers were supplied as references for this product listing:
-
22892106
-
20864712
-
22752690
-
22755615
-
22804954
-
25926938
-
20816454
-
22754644
-
23131610
-
22911900
-
23231817
-
23231813
-
22911902
-
23130972
-
84136206
-
20981770
-
23158042
-
20981767
-
20827127
-
19301486
-
20827128
-
25911087
-
20842710
-
22910018
-
22754645
Important Part Number Notice
These are the 25 unique part numbers provided in the listing. Repeated entries have been removed.
The supplied information does not identify one primary part number or establish that all listed numbers are interchangeable.
Different ABS modules may be required for different vehicle configurations.
Do not assume that every listed part number fits both the Chevrolet Equinox and GMC Terrain.
Confirm the correct replacement using your original ABS module part number and vehicle VIN.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and drivetrain configuration
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common Equinox and Terrain ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Service StabiliTrak warning
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Loss of anti-lock braking functionality
Diagnostic Note: Similar symptoms can result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
The following are general ABS diagnostic references. The supplied product information does not identify confirmed trouble codes for the listed modules.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
C0035 – Left Front Wheel Speed Sensor Circuit
May indicate a problem involving the left front wheel speed sensor circuit.
C0040 – Right Front Wheel Speed Sensor Circuit
May indicate a problem involving the right front wheel speed sensor circuit.
C0110 – Pump Motor Circuit
May indicate a problem involving the ABS pump motor circuit in applicable systems.
Important: These codes do not independently establish that an ABS control module requires replacement. Code definitions and diagnostic procedures should be checked against vehicle-specific service information.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number
-
Installing the compatible replacement ABS control module
-
Confirming VIN programming and vehicle configuration
-
Performing required ABS setup, initialization, or calibration
-
Bleeding the hydraulic brake system if necessary
-
Clearing stored diagnostic trouble codes
-
Testing ABS, traction control, and stability control operation
Important: The supplied product information does not establish whether the item includes the electronic ABS controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will this ABS module fit my 2012–2017 Chevy Equinox?
It is advertised for select 2012–2017 Chevrolet Equinox vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. Will this ABS module fit my 2012–2017 GMC Terrain?
It is advertised for select 2012–2017 GMC Terrain vehicles. Exact compatibility requires part-number and VIN verification.
3. Does this ABS module fit every Equinox and Terrain trim?
Not necessarily. Compatibility may vary according to the original ABS module and factory braking system configuration.
4. Is there one primary part number for this listing?
No primary part number was identified in the supplied information. Multiple part numbers were provided.
5. Are all 25 listed part numbers interchangeable?
Their interchangeability has not been independently established. The correct replacement must be confirmed for each vehicle.
6. Is ABS module 23231817 included in the part-number references?
Yes. 23231817 appears in the supplied list, but fitment must be verified.
7. Is ABS module 22892106 included in the part-number references?
Yes. 22892106 appears in the supplied list, but compatibility is not established for every vehicle.
8. Does this module fit both FWD and AWD vehicles?
Compatibility with both drivetrain configurations has not been confirmed. Verify your original ABS module number.
9. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
10. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
11. Is this ABS module plug-and-play?
Not necessarily. Additional setup, initialization, or calibration may be required after installation.
12. Can a faulty ABS module cause a Service StabiliTrak warning?
Yes. ABS system faults may affect applicable electronic stability control functions, although other faults can cause the same warning.
13. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
14. Can wheel speed sensor faults cause ABS warning lights?
Yes. Wheel speed sensor faults can trigger ABS and traction control warnings without an internal ABS module failure.
15. Is professional installation recommended?
Yes. ABS module installation may require specialized diagnostic equipment and braking system procedures.
Order Your 2012–2017 Equinox or Terrain ABS Control Module
Get an ABS Control Module for your 2012–2017 Chevrolet Equinox or GMC Terrain, VIN programmed for your vehicle.
VIN Programmed | ABS Control Module | Select Equinox and Terrain Applications
Before ordering, provide:
-
Your 17-digit VIN
-
Your original ABS module part number
-
Your vehicle year, model, and drivetrain configuration
PART NUMBER VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.