2012–2014 Jeep Wrangler JK ABS Control Module P68230240 | VIN Programmed
- Regular price $1,895.00
-
--45%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2012–2014 Jeep Wrangler JK ABS Control Module P68230240 | VIN Programmed
2012–2014 Jeep Wrangler ABS Control Module – P68230240AA
VIN Programmed | ABS Control Module Replacement | Special Order
Replace a malfunctioning anti-lock braking system controller with the 2012–2014 Jeep Wrangler ABS Control Module P68230240AA.
This replacement ABS module is advertised for select 2012, 2013, and 2014 Jeep Wrangler JK vehicles experiencing ABS warning lights, traction control problems, electronic stability control warnings, or communication faults involving the anti-lock braking system.
The supplied product information also identifies 68145835AE as a part number and provides several supersession references.
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
VIN PROGRAMMED FOR YOUR VEHICLE
SPECIAL ORDER: PLEASE ALLOW 3–4 WEEKS BEFORE SHIPPING.
Key Features
-
Advertised Vehicle: 2012–2014 Jeep Wrangler
-
Vehicle Generation: Jeep Wrangler JK
-
Listing Part Number: P68230240AA
-
Additional Identified Part Number: 68145835AE
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Availability: Special order
-
Shipping Preparation Time: Allow 3–4 weeks before shipping
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2012–2014 Jeep Wrangler JK
-
2012 Jeep Wrangler JK — select configurations
-
2013 Jeep Wrangler JK — select configurations
-
2014 Jeep Wrangler JK — select configurations
The advertised model-year range does not establish compatibility with every Wrangler trim, engine, drivetrain, or braking system configuration.
Compatibility may depend on:
-
Original ABS module part number
-
Two-door or four-door body configuration
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Verify your original ABS module part number before placing an order.
Part Numbers and Supersession References
Listing Part Number
-
P68230240AA
Additional Part Number Identified
-
68145835AE
Supersession References Supplied
-
68145835AD
-
68211530AA
-
68145835AB
-
68145835AA
-
68145835AC
These numbers were supplied as supersession references associated with the listing.
However, the supplied information does not establish the exact replacement relationship between P68230240AA and 68145835AE, or confirm that every listed number is interchangeable across all 2012–2014 Wrangler configurations.
Do not assume interchangeability without verifying your original module number and VIN.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Vehicle configuration and equipment
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Special Order and Shipping Information
THIS ABS MODULE IS A SPECIAL-ORDER ITEM.
Please allow 3–4 weeks before shipping.
This is the stated preparation period before shipment, not a guaranteed delivery date. Transit time is additional.
Confirm the correct part number before ordering to avoid ordering an incompatible special-order module.
Common Jeep Wrangler ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Loss of anti-lock braking functionality
Diagnostic Note: Similar symptoms can result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
The following codes are general ABS diagnostic references. They were not supplied as confirmed faults for this particular module.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate a pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: Diagnostic trouble codes alone do not establish that the ABS module requires replacement.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number
-
Installing the compatible replacement ABS control module
-
Confirming VIN programming and vehicle configuration
-
Performing required ABS initialization or calibration
-
Bleeding the hydraulic brake system if necessary
-
Clearing stored diagnostic trouble codes
-
Testing ABS, traction control, and stability control operation
Important: The supplied listing does not establish whether the product includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P68230240AA fit my 2012–2014 Jeep Wrangler?
It is advertised for select 2012–2014 Wrangler vehicles. Exact compatibility requires verification using your VIN and original ABS module part number.
2. What is the listing part number?
The product title identifies P68230240AA.
3. Why does the listing also mention 68145835AE?
The supplied product information separately identifies 68145835AE and instructs customers to verify the part number before ordering.
4. Are P68230240AA and 68145835AE interchangeable?
Their interchangeability has not been independently established. Confirm compatibility before ordering.
5. What supersession numbers are listed?
The supplied references are 68145835AD, 68211530AA, 68145835AB, 68145835AA, and 68145835AC.
6. Does this ABS module fit every 2012–2014 Jeep Wrangler?
Not necessarily. Fitment may vary according to the original module number and factory equipment.
7. Does this module fit both two-door Wrangler and four-door Wrangler Unlimited vehicles?
Compatibility with both body configurations has not been confirmed.
8. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
9. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
10. How long does this ABS module take to ship?
The supplied listing states that special-order parts require 3–4 weeks before shipping. Delivery transit time is additional.
11. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
12. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS faults may affect applicable traction control and electronic stability control functions.
13. What does C2200 mean?
It may indicate an internal ABS control module fault.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. ABS module installation may require specialized diagnostic equipment and braking system procedures.
Order Your 2012–2014 Jeep Wrangler ABS Control Module
Get your 2012–2014 Jeep Wrangler ABS Control Module P68230240AA, VIN programmed for your vehicle.
VIN Programmed | Special Order | Select 2012–2014 Jeep Wrangler JK Applications
Before ordering:
-
Verify your original ABS module part number
-
Provide your 17-digit VIN
-
Confirm
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.