2012–2014 Jeep Wrangler ABS Pump Control Module P04779788 | VIN Programmed
- Regular price $1,600.00
-
--22%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2012–2014 Jeep Wrangler ABS Pump Control Module P04779788 | VIN Programmed
2012–2014 Jeep Wrangler ABS Pump Control Module – P04779788AD
Anti-Lock Brake System (ABS) Control Module | OEM-Advertised Replacement | VIN Programming Available
Looking for a replacement 2012–2014 Jeep Wrangler ABS Control Module P04779788AD?
Auto Computer Performance offers an ABS pump control module advertised for select 2012, 2013, and 2014 Jeep Wrangler vehicles equipped with a compatible factory anti-lock braking system.
The ABS control module monitors wheel speed sensor information and helps coordinate the vehicle's anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
The supplied product listing identifies P04779788AD, 68145835AC, and P04779788AF as associated part numbers. It also states that the listed module was replaced by 68145835AE.
Vehicle-specific VIN programming is offered for compatible modules.
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER AND VEHICLE VIN BEFORE ORDERING.
Key Features
-
Vehicle Application: 2012–2014 Jeep Wrangler
-
Primary Part Number: P04779788AD
-
Additional Listed Part Numbers: 68145835AC and P04779788AF
-
Listed Replacement Number: 68145835AE
-
Component Type: ABS Pump / Anti-Lock Brake Control Module
-
OEM Identification: Advertised as genuine OEM
-
VIN Programming: Vehicle-specific programming offered
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed sensor information
-
Brake Pressure Regulation: Supports applicable hydraulic ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Original part number and VIN recommended
Vehicle Compatibility
Jeep Wrangler
-
2012 Jeep Wrangler — select configurations
-
2013 Jeep Wrangler — select configurations
-
2014 Jeep Wrangler — select configurations
The supplied product information identifies all three model years as intended applications.
Exact compatibility may depend on:
-
Original ABS module part number
-
Vehicle VIN
-
Factory ABS equipment
-
Two-door or four-door configuration
-
Vehicle trim and options
-
Factory traction control and stability control equipment
-
Electronic and hydraulic braking system configuration
Important: Not every 2012–2014 Jeep Wrangler necessarily uses the same ABS control module.
A matching model year alone is not sufficient to establish compatibility.
Before ordering, compare the part number on your original ABS module with the listed numbers and confirm the application using your VIN.
Part Numbers and Cross-References
Primary Part Number
P04779788AD
Additional Listed Part Numbers
-
68145835AC
-
P04779788AF
Listed Replacement Part Number
68145835AE
The supplied product listing explicitly states:
Replaced by: 68145835AE
This is a replacement relationship advertised by the seller. It has not been independently verified against manufacturer supersession records.
Understanding the Part Numbers
The listing includes several part numbers that may be useful when identifying a replacement ABS module.
However, the presence of multiple numbers in one listing does not independently establish universal interchangeability.
The numbers may represent different revisions or configurations.
For accurate fitment, confirm the original part number and VIN before ordering.
Important Note About the Product Image
The linked product image is labeled with these additional Jeep ABS module numbers:
-
68284715AA
-
68304562AA
-
68067458AA
These numbers appear in the image link description, not in the main product's part-number specifications.
The supplied information does not establish that they are compatible replacements for P04779788AD.
Do not use the image-associated numbers as confirmed interchange references without additional verification.
OEM ABS Pump Control Module
The supplied listing advertises this ABS module as a genuine OEM replacement.
An original-equipment ABS component is intended to support the vehicle's factory braking system when correctly matched and installed.
However, the supplied information does not independently establish:
-
Original-equipment authenticity
-
Whether the replacement is new, used, repaired, or remanufactured
-
Specific testing procedures
-
Software version
-
Warranty coverage
-
Exact included components
Confirm the product's condition and included components before ordering.
VIN Programming
Vehicle-specific VIN programming is offered for this ABS module.
Recommended Information Before Ordering
-
17-digit vehicle identification number (VIN)
-
Vehicle year and model
-
Original ABS module part number
-
Factory braking system equipment
-
Vehicle configuration
-
Stored diagnostic trouble codes, if available
Providing your VIN and original module number helps support compatibility verification.
Depending on the vehicle configuration and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2012–2014 Jeep Wrangler ABS Module Problems
A malfunctioning ABS pump or control module may be associated with several braking system symptoms.
These are general ABS-related symptoms and are not confirmed failures specific to part number P04779788AD.
ABS Warning Light Illuminated
An illuminated ABS warning light indicates that the vehicle has detected a fault requiring diagnosis.
Potential causes may include:
-
Wheel speed sensor faults
-
Electrical supply problems
-
Damaged wiring
-
Poor connections
-
ABS pump motor faults
-
ABS control module malfunctions
Traction Control or Stability Control Warning
Depending on factory equipment, ABS-related faults may affect traction control or electronic stability control operation.
ABS Pump Motor Problems
A pump motor circuit fault may produce warning lights or stored diagnostic trouble codes.
Communication Problems
A diagnostic scanner may be unable to communicate with the ABS module if a power supply, ground, wiring, network, or internal controller fault is present.
Intermittent ABS Operation
Electrical or communication problems may cause inconsistent ABS functionality.
Wheel Speed Sensor Problems
Wheel speed sensor faults may affect ABS operation.
However, a wheel speed sensor diagnostic code does not necessarily mean that the ABS control module itself is defective.
Diagnostic Note: These symptoms can result from components other than the ABS module.
Professional diagnosis is recommended before ordering a replacement.
Common ABS Diagnostic Trouble Codes
The supplied product information does not identify specific diagnostic trouble codes for P04779788AD.
The following codes are general examples of ABS-related faults that may occur in applicable vehicle systems. They are not verified as specific faults for this part number.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate a pump motor electrical problem or insufficient supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic fault within an ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Fault
May identify an internal electronic malfunction in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These diagnostic trouble codes do not independently establish that P04779788AD requires replacement.
Use vehicle-specific service information and diagnostic procedures before ordering.
ABS Pump Control Module Functions
Depending on factory equipment, the ABS system supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
ABS pump motor operation
-
Traction control
-
Electronic stability control
-
ABS diagnostic monitoring
-
Communication with other vehicle control modules
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control under appropriate conditions.
Replacing a defective module is intended to restore the vehicle's original system functions rather than add capabilities beyond its factory equipment.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Recommended Installation Procedure
-
Verify the original ABS module part number.
-
Confirm compatibility with the vehicle VIN.
-
Review the listed replacement number 68145835AE.
-
Confirm which replacement components are included.
-
Install the compatible ABS module or pump assembly according to the applicable service procedure.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic braking system if it was opened.
-
Clear stored diagnostic trouble codes.
-
Verify communication with the ABS module.
-
Confirm ABS, traction control, and stability control operation.
Important: The supplied listing describes an ABS pump assembly module but does not establish whether the product includes the electronic controller alone, the hydraulic pump, or a complete ABS assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P04779788AD fit my 2012 Jeep Wrangler?
The supplied listing identifies the 2012 Jeep Wrangler. Confirm compatibility using the original module number and VIN.
2. Will this ABS module fit my 2013 Jeep Wrangler?
The supplied listing includes the 2013 Jeep Wrangler. Exact fitment requires verification.
3. Will this ABS module fit my 2014 Jeep Wrangler?
The supplied listing includes the 2014 Jeep Wrangler. Verify the original part number and vehicle configuration.
4. What is the primary part number?
The primary part number is P04779788AD.
5. Is 68145835AC also listed for this product?
Yes. The supplied product description identifies 68145835AC as an associated part number.
6. Is P04779788AF also listed?
Yes. P04779788AF appears in the supplied part-number specifications.
7. What part number replaces P04779788AD?
The supplied listing states Replaced by: 68145835AE. This advertised replacement relationship has not been independently verified.
8. Is 68145835AE guaranteed to fit every vehicle using P04779788AD?
No. Confirm the replacement relationship and exact compatibility using the original part number and VIN.
9. Are P04779788AD and P04779788AF interchangeable?
Both numbers appear in the supplied listing, but universal interchangeability has not been independently verified.
10. Are 68284715AA, 68304562AA, and 68067458AA compatible?
These numbers appear in the linked image description. Their compatibility with P04779788AD has not been established.
11. Does this module fit every 2012–2014 Jeep Wrangler trim?
Not necessarily. Exact compatibility depends on the original ABS module and factory braking system configuration.
12. Is this a genuine OEM ABS module?
The supplied listing advertises it as genuine OEM, but authenticity has not been independently verified.
13. Is this ABS module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
14. Is VIN programming available?
Vehicle-specific VIN programming is offered. Confirm the programming details before ordering.
15. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the procedure with the installing technician.
16. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes. However, wheel speed sensors, wiring, voltage problems, and other faults can produce similar symptoms.
17. Does the replacement include the complete ABS hydraulic pump assembly?
The supplied information does not confirm whether the complete assembly is included.
18. Is professional installation recommended?
Yes. ABS module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2012–2014 Jeep Wrangler ABS Pump Control Module
Get your 2012–2014 Jeep Wrangler ABS Pump Control Module P04779788AD, with 68145835AC and P04779788AF also listed as associated part numbers.
The supplied listing identifies 68145835AE as the replacement number.
ABS Pump Control Module | VIN Programming Available | Select 2012–2014 Jeep Wrangler Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Review all associated part numbers carefully.
-
Confirm the advertised replacement relationship with 68145835AE.
-
Confirm the condition and included components.
-
Arrange professional installation and any required ABS initialization.
IMPORTANT: VERIFY PART NUMBER P04779788AD AND VEHICLE COMPATIBILITY BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.