2011 Jeep Wrangler JK ABS Pump Control Module 05154212 | VIN Programmed
- Regular price $1,395.00
-
--7%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2011 Jeep Wrangler JK ABS Pump Control Module 05154212 | VIN Programmed
2011 Jeep Wrangler ABS Control Module – 05154212AD
VIN Programmed | Anti-Lock Brake System Pump Control Module | 2011 Jeep Wrangler JK
Replace a malfunctioning ABS control module with the 2011 Jeep Wrangler ABS Control Module 05154212AD.
This replacement ABS module is advertised for select 2011 Jeep Wrangler JK vehicles experiencing ABS warning lights, traction control problems, electronic stability control warnings, or communication issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
Key Features
-
Advertised Vehicle: 2011 Jeep Wrangler
-
Vehicle Generation: Wrangler JK
-
Primary Part Number: 05154212AD
-
Additional Number Format: P05154212AD
-
Component Type: ABS Pump Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2011 Jeep Wrangler JK
-
2011 Jeep Wrangler — select configurations
-
2011 Jeep Wrangler Unlimited — compatibility to be verified
The supplied listing identifies the 2011 Jeep Wrangler but does not establish compatibility with every trim, body style, drivetrain, or factory braking system configuration.
Compatibility may depend on:
-
Original ABS module part number
-
Two-door or four-door configuration
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2011 Jeep Wrangler uses the same ABS module.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
05154212AD
Additional Part Number Format
-
P05154212AD
Supersession References Supplied
-
68089120AA
-
68089120AB
The supplied product information identifies these two numbers as supersession references associated with 05154212AD. The direction and applicability of the supersession relationship have not been independently verified.
Additional Numbers Shown in the Image Reference
-
68284715AA
-
68304562AA
-
68067458AA
These numbers appear in the supplied image reference. Their interchangeability with 05154212AD has not been established.
Important: Do not assume all listed part numbers are direct replacements for one another. Confirm compatibility using the original ABS module number and vehicle VIN.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Vehicle configuration and equipment
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2011 Jeep Wrangler ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
ABS pump running unexpectedly
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
Intermittent electrical power loss
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These are general ABS diagnostic references, not confirmed fault codes for part number 05154212AD. The supplied listing does not identify specific diagnostic codes.
Vehicle-specific diagnosis is recommended before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number
-
Installing the compatible replacement ABS control module
-
Confirming VIN programming and vehicle configuration
-
Performing required ABS initialization or calibration
-
Bleeding the hydraulic brake system if necessary
-
Clearing stored diagnostic trouble codes
-
Testing ABS, traction control, and stability control operation
Important: The supplied listing describes an ABS pump module or assembly but does not confirm whether the product includes the electronic controller alone or the complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 05154212AD fit my 2011 Jeep Wrangler?
It is advertised for select 2011 Jeep Wrangler vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. What is the full ABS module part number?
The primary part number is 05154212AD.
3. Is P05154212AD the same as 05154212AD?
Both formats are supplied in the product information. Confirm the part number against your original module before ordering.
4. What supersession numbers are associated with this module?
The supplied listing identifies 68089120AA and 68089120AB as supersession references.
5. Are 68284715AA, 68304562AA, and 68067458AA interchangeable with 05154212AD?
Their interchangeability has not been established from the supplied information.
6. Does this module fit a 2011 Jeep Wrangler Unlimited?
Compatibility with the four-door Wrangler Unlimited has not been independently verified. Check the original module number and VIN.
7. Does this module fit both two-door and four-door Wranglers?
Compatibility with both body styles has not been confirmed.
8. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
9. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
10. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
11. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS faults may affect applicable traction control and electronic stability control functions.
12. What does C2116 mean?
In applicable systems, it may indicate an ABS pump motor circuit or supply voltage problem.
13. What does C2200 mean?
It may indicate an internal ABS control module fault.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. ABS module installation may require specialized diagnostic equipment and braking system procedures.
Order Your 2011 Jeep Wrangler ABS Control Module
Get your 2011 Jeep Wrangler ABS Control Module 05154212AD, VIN programmed for your vehicle.
VIN Programmed | ABS Pump Control Module | Select 2011 Jeep Wrangler JK Applications
Provide your VIN and original ABS module part number to confirm compatibility before ordering.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.