2011 Dodge Challenger ABS Control Module 68089524 | VIN Programmed
- $1,100.00
-
Regular price
$1,312.50 -
-16%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2011 Dodge Challenger ABS Control Module 68089524 | VIN Programmed
2011 Dodge Challenger ABS Control Module – 68089524AA
Remanufactured | VIN Programmed | ABS Initialization Required After Installation
Replace a malfunctioning anti-lock braking system controller with the 2011 Dodge Challenger ABS Control Module 68089524AA from Auto Computer Performance.
This remanufactured ABS control module is advertised for select 2011 Dodge Challenger vehicles experiencing ABS warning lights, traction control problems, or other faults involving the anti-lock braking system.
The ABS control module monitors wheel speed information and coordinates anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
This module is pre-programmed for your vehicle, but ABS initialization must be performed after installation.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Key Features
-
Advertised Vehicle: 2011 Dodge Challenger
-
Primary Part Number: 68089524AA
-
Related Part Number: 68089524AC
-
Condition: Remanufactured
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Pre-programmed for your vehicle
-
Post-Installation Requirement: ABS initialization required
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2011 Dodge Challenger
-
2011 Dodge Challenger — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2011 Dodge Challenger necessarily uses the same ABS control module.
Compatibility with every engine, trim level, or factory braking system configuration has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68089524AA
Related Part Number
-
68089524AC
The supplied product information identifies 68089524AA as the primary part number and 68089524AC as a related part number.
Although both numbers belong to the same part-number family, the source does not explicitly confirm that 68089524AC is a direct replacement or supersession for 68089524AA.
Important: Confirm interchangeability using your original ABS module part number and vehicle VIN before ordering.
Remanufactured ABS Control Module
This 2011 Dodge Challenger ABS Control Module 68089524AA is advertised as a remanufactured replacement.
A remanufactured ABS control module may provide an alternative to purchasing a new replacement unit when the original controller has been properly diagnosed as faulty.
The supplied product information describes the unit as professionally remanufactured and tested. Specific testing procedures and performance results have not been independently verified.
VIN Programming
This ABS control module is pre-programmed for your vehicle before installation.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and factory braking system configuration
-
Stored diagnostic trouble codes, if available
Provide your 17-digit VIN when ordering so the module can be configured for your vehicle.
Pre-programming and post-installation initialization are separate procedures.
IMPORTANT: VIN PROGRAMMING DOES NOT ELIMINATE THE REQUIRED ABS INITIALIZATION.
ABS Initialization Required After Installation
ABS INITIALIZATION MUST BE PERFORMED AFTER INSTALLING THIS MODULE.
The supplied product information explicitly states that the module arrives pre-programmed but requires ABS initialization after installation.
A qualified automotive technician should use compatible diagnostic equipment to perform the appropriate vehicle-specific initialization procedure.
Depending on the repair and the vehicle's braking system, additional calibration or hydraulic system bleeding may be necessary.
Do not assume this module is fully plug-and-play.
The ABS and braking systems must be checked for proper operation before the vehicle is returned to service.
Common 2011 Dodge Challenger ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent braking system warning lights
-
Loss of anti-lock braking functionality
Diagnostic Note: These are general symptoms that may occur with ABS system faults. They are not confirmed symptoms specific to part number 68089524AA.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
A malfunctioning ABS module should not automatically be assumed to be the cause of engine-related problems.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The supplied product information does not identify specific diagnostic trouble codes for this module.
The following are general ABS diagnostic examples, not verified fault codes for part number 68089524AA.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that ABS module 68089524AA has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Install the compatible replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform the required ABS initialization procedure.
-
Complete any additional required calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68089524AA fit my 2011 Dodge Challenger?
It is advertised for select 2011 Dodge Challenger vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. What is the full ABS module part number?
The primary part number is 68089524AA.
3. Is 68089524AC related to 68089524AA?
Yes. The supplied product information lists 68089524AC as a related part number.
4. Is 68089524AC interchangeable with 68089524AA?
Interchangeability has not been independently verified. Confirm compatibility using the original module number and VIN.
5. Does this ABS module fit every 2011 Dodge Challenger trim?
Not necessarily. Fitment may vary according to the original ABS module and factory braking system configuration.
6. Is this ABS module remanufactured?
Yes. The supplied product information describes the module as remanufactured.
7. Is this ABS module pre-programmed?
Yes. The module is advertised as pre-programmed for your vehicle.
8. Do I need to provide my VIN?
Yes. Provide your 17-digit VIN for vehicle-specific programming and fitment verification.
9. Is ABS initialization required after installation?
Yes. ABS initialization is required after installation, even though the module is pre-programmed.
10. Is this ABS module plug-and-play?
Not completely. The supplied installation instructions explicitly require ABS initialization.
11. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes. ABS controller faults can trigger warning lights, although other braking system
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.