2011–2014 Chrysler 200 ABS Control Module P68085222 | VIN Programmed
- $699.00
-
Regular price
$1,312.50 -
-46%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2011–2014 Chrysler 200 ABS Control Module P68085222 | VIN Programmed
2011–2014 Chrysler 200 ABS Control Module – P68085222AD
VIN Programmed | Remanufactured ABS Control Module | ABS Initialization Required
Replace a malfunctioning anti-lock braking system controller with the 2011–2014 Chrysler 200 ABS Control Module P68085222AD.
This remanufactured ABS control module is advertised for select 2011, 2012, 2013, and 2014 Chrysler 200 vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Key Features
-
Advertised Vehicle: Chrysler 200
-
Advertised Model Years: 2011–2014
-
Primary Part Number: P68085222AD
-
Alternative Part Number Format: 68085222AD
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
Condition: Remanufactured
-
VIN Programming: Programmed using your vehicle's supplied VIN before shipping
-
ABS Initialization: Required after installation
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2011–2014 Chrysler 200
-
2011 Chrysler 200 — select configurations
-
2012 Chrysler 200 — select configurations
-
2013 Chrysler 200 — select configurations
-
2014 Chrysler 200 — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2011–2014 Chrysler 200 necessarily uses the same ABS control module.
Compatibility with every engine, trim level, or factory braking system configuration has not been independently verified.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
P68085222AD
Additional Listed Part Number
-
68085222AD
The supplied listing identifies both P68085222AD and 68085222AD for this product.
These numbers share the same numeric sequence and suffix, with the second format omitting the leading P.
No additional supersessions or confirmed interchangeable replacement numbers were provided.
Important: Verify your original ABS module part number before ordering.
Remanufactured ABS Control Module
This replacement ABS control module is identified as a remanufactured unit.
Remanufacturing involves servicing an existing automotive electronic component for reuse.
A compatible remanufactured module may provide an alternative to purchasing a new replacement component.
The exact inspection, repair, and testing procedures for this individual unit have not been independently verified.
VIN Programming
This ABS control module is VIN programmed for your vehicle before shipping using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and vehicle configuration
-
Stored diagnostic trouble codes, if available
IMPORTANT: THE MODULE IS PRE-PROGRAMMED, BUT ABS INITIALIZATION IS STILL REQUIRED AFTER INSTALLATION.
ABS Initialization Required After Installation
ABS INITIALIZATION MUST BE PERFORMED AFTER INSTALLING THIS MODULE.
Although the replacement module is programmed before shipping, the supplied product instructions explicitly require ABS initialization after installation.
A qualified automotive technician should use compatible diagnostic equipment to perform the required vehicle-specific procedure.
Depending on the repair, additional configuration, calibration, or hydraulic system bleeding may also be necessary.
Do not assume this module is plug-and-play.
The braking system must be checked for correct operation before the vehicle is returned to service.
Common Chrysler 200 ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
Intermittent ABS operation
-
ABS pump motor-related faults
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms can also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An ABS fault does not necessarily indicate an engine control problem.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
The following are general ABS diagnostic references. They were not supplied as confirmed trouble codes for part number P68085222AD.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: Diagnostic trouble codes alone do not establish that the ABS control module requires replacement.
Vehicle-specific diagnostic procedures should be followed.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Install the compatible replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform the required ABS initialization procedure.
-
Complete any additional required calibration or setup.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the product includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P68085222AD fit my 2011 Chrysler 200?
It is advertised for select 2011 Chrysler 200 vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. Will this ABS module fit my 2012 Chrysler 200?
The 2012 Chrysler 200 is included in the advertised model-year range. Exact fitment requires verification.
3. Will this ABS module fit my 2013 Chrysler 200?
The 2013 Chrysler 200 is included in the advertised application. Verify your original ABS module number.
4. Will this ABS module fit my 2014 Chrysler 200?
The 2014 Chrysler 200 is included in the advertised application. Exact fitment must be confirmed.
5. What is the full ABS module part number?
The primary part number is P68085222AD.
6. Is 68085222AD another format of P68085222AD?
Both numbers appear in the supplied listing and differ by the leading P. Confirm the original part number before ordering.
7. Is this ABS module remanufactured?
Yes. The supplied product information identifies it as a remanufactured ABS control module.
8. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN before shipping.
9. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
10. Is ABS initialization required after installation?
Yes. ABS initialization is required after installation, even though the module is pre-programmed.
11. Is this ABS module plug-and-play?
No plug-and-play installation should be assumed. The supplied instructions explicitly require ABS initialization.
12. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control and electronic stability control functions.
13. What does C2200 mean?
In applicable systems, it may indicate an internal ABS control module fault.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. A qualified technician with suitable diagnostic equipment is recommended because ABS initialization is required.
Order Your 2011–2014 Chrysler 200 ABS Control Module
Get your 2011–2014 Chrysler 200 ABS Control Module P68085222AD, remanufactured and VIN programmed for your vehicle.
VIN Programmed | Remanufactured ABS Module | Select 2011–2014 Chrysler 200 Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's engine and braking system configuration.
-
Arrange for required ABS initialization after installation.
IMPORTANT: ABS INITIALIZATION REQUIRED AFTER INSTALLATION.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.