2011–2012 Dodge Charger ABS Control Module 04584549 | VIN Programmed
- $1,150.00
-
Regular price
$1,312.50 -
-12%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2011–2012 Dodge Charger ABS Control Module 04584549 | VIN Programmed
2011–2012 Dodge Charger ABS Control Module – 04584549AG
VIN Programmed | Anti-Lock Brake System Control Module | Dodge Charger ABS Module Replacement
Replace a malfunctioning ABS controller with the 2011–2012 Dodge Charger ABS Control Module 04584549AG.
This replacement anti-lock brake control module is advertised for select 2011 and 2012 Dodge Charger vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
YOUR 17-DIGIT VIN IS REQUIRED AT CHECKOUT FOR PROGRAMMING.
Key Features
-
Advertised Vehicle: Dodge Charger
-
Advertised Model Years: 2011–2012
-
Primary Part Number: 04584549AG
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2011–2012 Dodge Charger
-
2011 Dodge Charger — select configurations
-
2012 Dodge Charger — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Vehicle trim and equipment
-
Drivetrain configuration
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2011–2012 Dodge Charger necessarily uses the same ABS control module.
Compatibility with specific engines, trim levels, and drivetrain configurations has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
04584549AG
Additional Part Number References
-
P04584549AF
-
04584549AF
These additional part numbers were supplied as associated references for this product listing.
Their interchangeability with 04584549AG has not been independently verified.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied during checkout.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and drivetrain configuration
-
Stored diagnostic trouble codes, if available
Providing the correct VIN helps ensure that the module is programmed for the intended vehicle.
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2011–2012 Dodge Charger ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Wheel speed sensor-related warning lights
-
Intermittent or inaccurate speedometer readings
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
The following codes were supplied as diagnostic references for this product listing.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that part number 04584549AG has failed. Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number.
-
Installing the compatible replacement ABS control module.
-
Confirming VIN programming and vehicle configuration.
-
Performing required ABS initialization or calibration.
-
Bleeding the hydraulic brake system if necessary.
-
Clearing stored diagnostic trouble codes.
-
Testing ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 04584549AG fit my 2011 Dodge Charger?
It is advertised for select 2011 Dodge Charger vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. Will this ABS module fit my 2012 Dodge Charger?
The 2012 Dodge Charger is included in the advertised application. Exact fitment requires verification.
3. What is the full ABS module part number?
The primary part number is 04584549AG.
4. Is P04584549AF compatible with 04584549AG?
The supplied listing associates these part numbers, but interchangeability has not been independently verified.
5. Is 04584549AF interchangeable with 04584549AG?
Compatibility must be confirmed using your original module number and vehicle VIN.
6. Does this ABS module fit every Dodge Charger trim?
Not necessarily. Fitment may vary according to the original ABS module and factory braking system configuration.
7. Does this module fit both RWD and AWD Dodge Chargers?
Compatibility with both drivetrain configurations has not been established. Verify your original module number.
8. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
9. Do I need to provide my VIN at checkout?
Yes. Your 17-digit VIN is required at checkout for programming.
10. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
11. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control and electronic stability control functions.
12. What does C2116 mean?
It may indicate an ABS pump motor fault or insufficient pump supply voltage.
13. What does C2200 mean?
It may indicate an internal ABS control module fault.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. ABS module installation may require specialized diagnostic equipment and braking system procedures.
Order Your 2011–2012 Dodge Charger ABS Control Module
Get your 2011–2012 Dodge Charger ABS Control Module 04584549AG, VIN programmed for your vehicle.
VIN Programmed | ABS Control Module | Select 2011–2012 Dodge Charger Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN at checkout.
-
Confirm your vehicle's engine and drivetrain configuration.
-
Arrange for any required ABS setup or calibration after installation.
IMPORTANT: VIN REQUIRED FOR PROGRAMMING. PART NUMBER VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.