2010 Jeep Commander ABS Control Module 68049120 | VIN Programming
- $549.00
-
Regular price
$1,312.50 -
-58%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2010 Jeep Commander ABS Control Module 68049120 | VIN Programming
2010 Jeep Commander ABS Control Module – 68049120AB
Anti-Lock Brake System (ABS) Control Module | Part Number 68049120AB | VIN Programming Available
Is your 2010 Jeep Commander experiencing ABS warning lights, traction control problems, or diagnostic trouble codes such as C2116, C2200, C2200-49, or U0121?
Auto Computer Performance offers the 2010 Jeep Commander ABS Control Module 68049120AB as a replacement option for vehicles equipped with a compatible factory anti-lock braking system.
The ABS control module is an important electronic component of the vehicle's braking system. It receives wheel speed information, coordinates anti-lock braking functions, and communicates with other vehicle control modules.
Depending on the vehicle's factory equipment, the ABS system may also support traction control and electronic stability control.
When the original module develops an internal fault or communication problem, a correctly matched replacement may help restore the vehicle's factory ABS functionality after proper diagnosis, installation, and configuration.
The supplied product listing identifies 68049120AB as the primary part number and highlights four ABS-related diagnostic trouble codes:
-
C2116 – Pump Motor Fault / Pump Supply Low Voltage
-
C2200 – Anti-Lock Brake Module Internal Fault
-
C2200-49 – Anti-Lock Brake Module Internal Fault
-
U0121 – Lost Communication with ABS Module
Vehicle-specific VIN programming is available as a service option for compatible modules.
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER AND 17-DIGIT VIN BEFORE ORDERING.
Key Features
-
Vehicle Application: 2010 Jeep Commander
-
Primary Part Number: 68049120AB
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Vehicle-specific programming available, subject to confirmation
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed sensor information
-
Brake Pressure Regulation: Coordinates applicable ABS hydraulic control functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Vehicle Communication: Exchanges information with other vehicle control modules
-
Diagnostic References: C2116, C2200, C2200-49, U0121
-
Fitment Verification: Original part number and VIN recommended
-
Installation: Additional ABS initialization or calibration may be required
Vehicle Compatibility
Jeep Commander
-
2010 Jeep Commander — select configurations
The supplied product listing identifies the 2010 Jeep Commander as the intended vehicle application.
Exact compatibility may depend on:
-
Original ABS control module part number
-
Vehicle identification number (VIN)
-
Engine configuration
-
Drivetrain configuration
-
Factory ABS equipment
-
Traction control and electronic stability control configuration
-
Vehicle trim and factory options
-
Electronic and hydraulic braking system configuration
Important: Not every 2010 Jeep Commander necessarily uses the same ABS control module.
A matching model year alone does not establish compatibility.
Before ordering, compare the part number printed on your original ABS module with 68049120AB and confirm fitment using your VIN.
Part Numbers and Cross-References
Primary Part Number
68049120AB
This is the primary part number identified in the supplied product heading.
Part Number Identification
-
Base Number: 68049120
-
Full Part Number: 68049120AB
-
Suffix: AB
Use the complete part number when comparing the replacement with your original module.
Different suffixes may represent different revisions or vehicle configurations.
Additional Numbers Appearing in the Product Image Link
The supplied image link references:
-
68284715AA
-
68304562AA
-
68067458AA
These numbers appear in the linked image description rather than the main product specifications.
The supplied information does not establish that these image-associated numbers are interchangeable replacements for 68049120AB.
Do not advertise 68284715AA, 68304562AA, or 68067458AA as confirmed compatible replacements without additional verification.
Important Part Number Verification
Even when two ABS modules look similar, their electronic configuration, software, or hydraulic system requirements may differ.
Always confirm compatibility using the original module part number and vehicle VIN.
Replacement Jeep Commander ABS Control Module
The 2010 Jeep Commander ABS Control Module 68049120AB is advertised as a replacement option for a compatible factory braking system.
A correctly matched and functioning ABS module is intended to support the vehicle's original anti-lock braking functions.
However, the supplied product information does not specify:
-
Whether the unit is new, used, repaired, or remanufactured
-
Whether the unit is genuine OEM
-
Specific testing procedures
-
Software version
-
Warranty coverage
-
Whether the complete hydraulic ABS pump assembly is included
Confirm the replacement's condition and included components before purchasing.
VIN Programming
Vehicle-specific VIN programming is available as a service option for compatible ABS modules.
Recommended Information Before Ordering
-
17-digit vehicle identification number (VIN)
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Drivetrain configuration
-
Factory braking system equipment
-
Stored diagnostic trouble codes, if available
Providing the VIN and original module identification helps support compatibility verification.
Depending on the vehicle configuration and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Confirm the programming requirements before ordering.
Common 2010 Jeep Commander ABS Module Problems
A malfunctioning ABS control module may be associated with several braking system symptoms.
The following are general ABS-related symptoms and are not confirmed failures specific to part number 68049120AB.
ABS Warning Light Illuminated
An illuminated ABS warning light indicates that the vehicle has detected a fault requiring diagnosis.
Possible causes may include:
-
Wheel speed sensor faults
-
Electrical supply problems
-
Damaged wiring
-
Poor electrical connections
-
ABS pump motor faults
-
ABS control module malfunctions
Traction Control Warning Light
Depending on factory equipment, ABS-related faults may affect traction control operation.
Electronic Stability Control Warning
ABS system problems may also affect electronic stability control functions.
ABS Pump Motor Problems
An ABS pump motor or associated electrical circuit fault may cause warning lights or stored diagnostic trouble codes.
Communication Problems
A diagnostic scanner may be unable to communicate with the ABS module when a power supply, ground, wiring, vehicle network, or internal controller fault is present.
Intermittent ABS Functionality
Electrical or communication problems may cause inconsistent ABS operation.
Wheel Speed Sensor Problems
Wheel speed sensor faults may affect ABS functionality.
However, a wheel speed sensor diagnostic code does not necessarily mean the ABS control module itself is defective.
Diagnostic Note: These symptoms can result from components other than the ABS module.
Professional diagnosis is recommended before ordering a replacement.
Common ABS Diagnostic Trouble Codes
The supplied product listing specifically identifies the following diagnostic trouble codes.
C2116 – Pump Motor Fault / Pump Supply Low Voltage
The supplied listing associates C2116 with an ABS pump motor fault or insufficient pump supply voltage.
Potential diagnostic areas may include:
-
ABS pump motor
-
Pump motor power supply
-
Electrical wiring and connectors
-
Ground circuits
-
ABS control circuitry
A C2116 code does not automatically confirm that the electronic ABS module requires replacement.
C2200 – Anti-Lock Brake Module Internal Fault
The supplied listing identifies C2200 as an internal ABS control module fault.
An internal electronic fault may interfere with the module's ability to perform its intended functions.
A vehicle-specific diagnostic procedure should be completed before determining that replacement is necessary.
C2200-49 – Anti-Lock Brake Module Internal Fault
The supplied listing associates C2200-49 with an internal ABS controller fault.
The additional failure-type information may help a qualified technician interpret the diagnostic result.
Confirm the exact code definition and repair procedure using vehicle-specific service information.
U0121 – Lost Communication with ABS Module
U0121 generally indicates that another vehicle control module has lost communication with the ABS controller.
Possible causes may include:
-
ABS module power supply problems
-
Poor ground connections
-
Damaged wiring
-
Vehicle communication network faults
-
Internal ABS control module problems
Important: These codes are included because they appear in the supplied product listing. Their occurrence does not independently prove that 68049120AB is defective.
Proper diagnosis is recommended before replacement.
ABS Control Module Functions
Depending on factory equipment, the ABS system supports:
-
Anti-lock braking
-
Wheel speed sensor monitoring
-
Hydraulic brake pressure regulation
-
ABS pump motor control
-
Traction control
-
Electronic stability control
-
ABS fault detection and reporting
-
Communication with other vehicle control modules
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control under appropriate conditions.
Replacing a faulty module is intended to restore the vehicle's original braking system functions rather than add capabilities beyond its factory equipment.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Recommended Installation Procedure
-
Verify the original ABS module part number.
-
Confirm compatibility using the vehicle VIN.
-
Confirm the replacement's condition and included components.
-
Install the compatible ABS module according to the applicable service procedure.
-
Confirm the replacement's programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic braking system if it was opened.
-
Clear stored diagnostic trouble codes.
-
Verify communication with the ABS module.
-
Confirm proper ABS, traction control, and stability control operation.
Important: The supplied listing identifies an ABS control module but does not confirm whether the replacement includes the electronic controller alone or the complete hydraulic ABS pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68049120AB fit my 2010 Jeep Commander?
The supplied listing identifies the 2010 Jeep Commander as the intended application. Confirm compatibility using the original ABS module number and VIN.
2. What is the primary part number?
The primary part number is 68049120AB.
3. Does this module fit every 2010 Jeep Commander trim?
Not necessarily. Compatibility depends on the original ABS module and factory braking system configuration.
4. Are 68284715AA, 68304562AA, and 68067458AA compatible with 68049120AB?
These numbers appear in the image link description. Their compatibility has not been established by the supplied product specifications.
5. Is this a genuine OEM ABS module?
The supplied information does not independently establish OEM authenticity.
6. Is this ABS module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
7. Is VIN programming available?
Vehicle-specific VIN programming is available as a service option, subject to confirmation.
8. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the procedure with the installing technician.
9. What does diagnostic code C2116 mean?
The supplied listing associates C2116 with an ABS pump motor fault or low pump supply voltage.
10. What does diagnostic code C2200 mean?
The supplied listing identifies C2200 as an internal ABS control module fault.
11. What does diagnostic code C2200-49 mean?
The supplied listing associates C2200-49 with an internal ABS controller fault.
12. What does diagnostic code U0121 mean?
U0121 generally indicates lost communication with the ABS control module.
13. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes, although wheel speed sensors, wiring, voltage problems, and other faults may cause similar symptoms.
14. Can a faulty ABS module affect traction control?
ABS-related faults may affect traction control in vehicles equipped with the system.
15. Can an ABS module cause communication problems with a diagnostic scanner?
Yes. However, electrical supply, ground, wiring, and vehicle network faults may also prevent communication.
16. Does this replacement include the complete ABS hydraulic pump assembly?
The supplied information does not confirm whether the complete assembly is included.
17. Can I replace the ABS module without specialized equipment?
ABS module replacement may require diagnostic equipment and additional configuration procedures. Professional installation is recommended.
18. What information should I provide before ordering?
Provide your 17-digit VIN, original ABS module part number, vehicle configuration, and any available diagnostic trouble codes.
Order Your 2010 Jeep Commander ABS Control Module
Get your 2010 Jeep Commander ABS Control Module 68049120AB from Auto Computer Performance.
ABS Control Module | VIN Programming Available | Select 2010 Jeep Commander Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm compatibility with your factory braking system.
-
Verify the replacement's condition and included components.
-
Confirm any required programming or ABS initialization procedures.
-
Arrange professional installation.
IMPORTANT: VERIFY PART NUMBER 68049120AB AND VEHICLE COMPATIBILITY BEFORE ORDERING. THE IMAGE-ASSOCIATED NUMBERS 68284715AA, 68304562AA, AND 68067458AA ARE NOT CONFIRMED INTERCHANGE REFERENCES.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.