2010 Dodge Challenger 5.7L ABS Control Module 04779700 | VIN Programmed
- $599.00
-
Regular price
$1,312.50 -
-54%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2010 Dodge Challenger 5.7L ABS Control Module 04779700 | VIN Programmed
2010 Dodge Challenger 5.7L ABS Control Module – 04779700AC
VIN Programmed | Anti-Lock Brake System Control Module | 2010 Dodge Challenger 5.7L HEMI
Replace a malfunctioning anti-lock braking system controller with the 2010 Dodge Challenger 5.7L ABS Control Module 04779700AC.
This replacement ABS control module is advertised for select 2010 Dodge Challenger models equipped with the 5.7L HEMI V8 engine.
If your Challenger is experiencing ABS warning lights, traction control problems, electronic stability control warnings, or communication faults involving the braking system, a defective ABS controller may be one possible cause.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicle: 2010 Dodge Challenger
-
Engine: 5.7L HEMI V8
-
Primary Part Number: 04779700AC
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2010 Dodge Challenger 5.7L
-
2010 Dodge Challenger — 5.7L HEMI V8, select configurations
The supplied product title identifies the 2010 Dodge Challenger with the 5.7L engine.
Compatibility may depend on:
-
Original ABS module part number
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2010 Dodge Challenger necessarily uses the same ABS control module.
Compatibility with other engines, model years, or vehicle models has not been established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
04779700AC
The supplied product information identifies 04779700AC as the ABS control module part number.
No additional part numbers, supersessions, or confirmed interchangeable references were provided.
Important: Do not assume that other revisions of the 04779700 part-number family are interchangeable without verification.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2010 Dodge Challenger ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
ABS pump running unexpectedly
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
Intermittent electrical power loss
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
The following codes are general ABS diagnostic references. They were not supplied as confirmed faults for part number 04779700AC.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: Diagnostic trouble codes alone do not establish that the ABS module requires replacement.
Vehicle-specific diagnostic procedures should be followed.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number.
-
Installing the compatible replacement ABS control module.
-
Confirming VIN programming and vehicle configuration.
-
Performing required ABS initialization or calibration.
-
Bleeding the hydraulic brake system if necessary.
-
Clearing stored diagnostic trouble codes.
-
Testing ABS, traction control, and stability control operation.
Important: The supplied product title identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 04779700AC fit my 2010 Dodge Challenger?
It is advertised for select 2010 Dodge Challenger vehicles equipped with the 5.7L engine. Confirm compatibility using your VIN and original ABS module number.
2. What is the full ABS module part number?
The primary part number is 04779700AC.
3. Does this ABS module fit the 2010 Dodge Challenger 5.7L HEMI?
The supplied product title identifies that application. Exact fitment still requires verification.
4. Will this module fit a Dodge Challenger with the 3.5L V6?
Compatibility with the 3.5L engine has not been established.
5. Will this module fit a Dodge Challenger SRT8 with the 6.1L engine?
Compatibility with the 6.1L SRT8 has not been established.
6. Are other 04779700 part-number revisions interchangeable with 04779700AC?
No additional revisions were supplied as verified replacements. Confirm any proposed interchange before ordering.
7. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
8. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
9. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
10. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS faults may affect applicable traction control and electronic stability control functions.
11. What does C2116 mean?
In applicable systems, it may indicate an ABS pump motor circuit or supply voltage problem.
12. What does C2200 mean?
It may indicate an internal ABS control module fault.
13. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
14. Can a bad ABS module prevent communication with a diagnostic scanner?
Yes. An internal module fault may prevent communication, although wiring, power supply, ground, and network issues can produce similar symptoms.
15. Is professional installation recommended?
Yes. ABS module installation may require specialized diagnostic equipment and braking system procedures.
Order Your 2010 Dodge Challenger 5.7L ABS Control Module
Get your 2010 Dodge Challenger 5.7L ABS Control Module 04779700AC, VIN programmed for your vehicle.
VIN Programmed | ABS Control Module | Select 2010 Dodge Challenger 5.7L Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's engine and braking system configuration.
-
Arrange for any required ABS setup or calibration after installation.
PART NUMBER VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.