2010 Chrysler Town & Country ABS Control Module 68053288 | VIN Programmed
- $499.00
-
Regular price
$1,312.50 -
-61%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2010 Chrysler Town & Country ABS Control Module 68053288 | VIN Programmed
2010 Chrysler Town & Country ABS Control Module – 68053288AC
VIN Programmed | Remanufactured ABS Control Module | ABS Initialization Required
Replace a malfunctioning anti-lock braking system controller with the 2010 Chrysler Town & Country ABS Control Module 68053288AC.
This remanufactured ABS control module is advertised for select 2010 Chrysler Town & Country minivans experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Key Features
-
Advertised Vehicle: 2010 Chrysler Town & Country
-
Primary Part Number: 68053288AC
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
Condition: Remanufactured
-
VIN Programming: Programmed using your vehicle's supplied VIN before shipping
-
ABS Initialization: Required after installation
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2010 Chrysler Town & Country
-
2010 Chrysler Town & Country — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Vehicle trim and equipment
-
Engine configuration
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2010 Chrysler Town & Country necessarily uses the same ABS control module.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68053288AC
Additional Part Number References
-
68053288AA
-
68053288AB
-
P68053600AA
-
P68053600AB
-
68053600AC
These numbers were supplied as associated references for this product listing.
The supplied information does not independently establish that every listed part number is interchangeable with 68053288AC.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN.
Remanufactured ABS Control Module
This replacement ABS module is identified as a remanufactured unit.
Remanufacturing involves servicing an existing automotive electronic component for reuse. The exact inspection, repair, and testing procedures for this individual unit have not been independently verified.
A compatible remanufactured ABS control module may be an alternative to purchasing a new replacement component.
VIN Programming
This ABS control module is VIN programmed for your vehicle before shipping using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Vehicle configuration and equipment
-
Stored diagnostic trouble codes, if available
IMPORTANT: VIN PROGRAMMING DOES NOT ELIMINATE THE REQUIRED ABS INITIALIZATION PROCEDURE.
ABS Initialization Required After Installation
ABS INITIALIZATION MUST BE PERFORMED AFTER INSTALLING THIS MODULE.
Although the replacement module is programmed before shipping, the supplied product information explicitly requires ABS initialization after installation.
A qualified automotive technician should use compatible diagnostic equipment to perform the necessary vehicle-specific procedure.
Depending on the repair, additional configuration, calibration, or hydraulic system bleeding may also be necessary.
Do not assume this module is plug-and-play.
The braking system must be checked for correct operation before the vehicle is returned to service.
Common 2010 Chrysler Town & Country ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Wheel speed sensor-related warning lights
-
Intermittent or inaccurate speedometer readings
-
Loss of anti-lock braking functionality
Diagnostic Note: Similar symptoms may result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An ABS fault does not necessarily indicate an engine control problem.
Proper diagnosis is recommended before replacing the ABS module.
Common ABS Diagnostic Trouble Codes
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes are supplied as diagnostic references. They do not independently confirm that part number 68053288AC has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Install the compatible replacement ABS control module.
-
Confirm the VIN programming and vehicle configuration.
-
Perform the required ABS initialization procedure.
-
Complete any additional required calibration or setup.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied listing identifies an ABS control module but does not establish whether the product includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68053288AC fit my 2010 Chrysler Town & Country?
It is advertised for select 2010 Chrysler Town & Country vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. What is the full ABS module part number?
The primary part number is 68053288AC.
3. Is this ABS module remanufactured?
Yes. The supplied product information identifies it as a remanufactured ABS control module.
4. Are 68053288AA and 68053288AB compatible with 68053288AC?
They are listed as associated part numbers, but interchangeability has not been independently verified.
5. Is P68053600AA interchangeable with 68053288AC?
The supplied listing associates these numbers, but compatibility should be confirmed using the original module and VIN.
6. Is P68053600AB included in the part-number references?
Yes. P68053600AB appears in the supplied references.
7. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN before shipping.
8. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
9. Is ABS initialization required after installation?
Yes. ABS initialization is required after installation, even though the module is programmed before shipping.
10. Is this ABS module plug-and-play?
No plug-and-play installation should be assumed. The supplied instructions explicitly require ABS initialization.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.