2009 Jeep Wrangler ABS Control Module P68032358 | VIN Programmed
- $1,199.00
-
Regular price
$1,312.50 -
-8%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2009 Jeep Wrangler ABS Control Module P68032358 | VIN Programmed
2009 Jeep Wrangler ABS Control Module – P68032358AC
Anti-Lock Brake System Control Module | VIN Programmed | Part Number P68032358AC
Replace a malfunctioning anti-lock braking system controller with the 2009 Jeep Wrangler ABS Control Module P68032358AC from Auto Computer Performance.
This replacement ABS control module is advertised for select 2009 Jeep Wrangler vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
This replacement is offered with vehicle-specific VIN programming. Additional ABS initialization or calibration may be required after installation.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER AND VIN BEFORE ORDERING.
Key Features
-
Advertised Vehicle: 2009 Jeep Wrangler
-
Primary Part Number: P68032358AC
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Vehicle-specific programming offered
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed information
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
-
Additional Image-Associated Numbers: 68284715AA, 68304562AA, 68067458AA
Vehicle Compatibility
2009 Jeep Wrangler
-
2009 Jeep Wrangler — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Two-door or four-door body configuration
-
Factory braking system equipment
-
Vehicle trim
-
Vehicle VIN
Important: Not every 2009 Jeep Wrangler necessarily uses the same ABS control module.
Compatibility with every trim level, body style, or factory braking system configuration has not been independently verified.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
P68032358AC
Additional Part Numbers Appearing in the Supplied Image Link
-
68284715AA
-
68304562AA
-
68067458AA
The supplied image link contains these additional part-number references.
However, the listing does not explicitly confirm that they are replacements, supersessions, or interchangeable alternatives to P68032358AC.
Important: Do not assume that every number appearing in an image filename or link title is compatible with the 2009 Jeep Wrangler.
Confirm compatibility using the original ABS module part number and vehicle VIN before ordering.
Replacement ABS Control Module
The 2009 Jeep Wrangler ABS Control Module P68032358AC is advertised as a replacement for a compatible factory ABS controller.
A properly matched ABS control module is designed to communicate with the vehicle's braking system and support its factory anti-lock braking functions.
The supplied product description promotes the module as a high-quality replacement. However, its condition, manufacturing source, specific testing procedures, and performance results have not been independently verified.
Confirm whether the specific unit is new, used, or remanufactured before ordering.
VIN Programming
This ABS control module is offered with vehicle-specific VIN programming.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine configuration
-
Factory braking system configuration
-
Stored diagnostic trouble codes, if available
Provide your 17-digit VIN when ordering so the correct vehicle configuration can be checked.
Depending on the vehicle and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2009 Jeep Wrangler ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
ABS pump running continuously
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent braking system warning lights
-
Loss of anti-lock braking functionality
Diagnostic Note: These are general ABS-related symptoms, not confirmed faults specific to part number P68032358AC.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, insufficient electrical supply voltage, poor connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The supplied product information does not identify specific diagnostic trouble codes for this module.
The following are general ABS diagnostic examples, not verified fault codes for part number P68032358AC.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that ABS module P68032358AC has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Confirm that the replacement is compatible with the vehicle's factory ABS system.
-
Install the replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied information identifies an ABS control module but does not establish whether the product includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P68032358AC fit my 2009 Jeep Wrangler?
It is advertised for select 2009 Jeep Wrangler vehicles. Confirm compatibility using your original ABS module number and VIN.
2. What is the full ABS module part number?
The primary part number is P68032358AC.
3. Is P68032358AC compatible with every 2009 Jeep Wrangler trim?
Not necessarily. Fitment depends on the factory ABS system and original module part number.
4. Does this ABS module fit two-door Jeep Wrangler models?
Compatibility with specific two-door configurations has not been independently verified.
5. Does this ABS module fit four-door Jeep Wrangler Unlimited models?
Compatibility with specific Wrangler Unlimited configurations has not been independently verified.
6. Is 68284715AA interchangeable with P68032358AC?
The number appears in the supplied image link, but interchangeability has not been established.
7. Is 68304562AA compatible with P68032358AC?
The supplied image link references this number. Confirm compatibility before ordering.
8. Is 68067458AA compatible with P68032358AC?
The supplied image link references this number, but confirmed interchangeability has not been established.
9. Are these additional part numbers confirmed supersessions?
No verified supersession relationship was supplied.
10. Is this ABS module new or remanufactured?
The supplied product information does not specify its condition. Confirm this before ordering.
11. Is this ABS module VIN programmed?
Vehicle-specific VIN programming is offered. Confirm the programming details when placing your order.
12. Do I need to provide my VIN?
Yes. Provide your 17-digit VIN for programming and fitment verification.
13. Is ABS initialization required after installation?
Additional initialization or calibration may be required. Confirm the vehicle-specific procedure with the installing technician.
14. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes. ABS controller faults can illuminate the warning light, although other braking system problems may cause similar symptoms.
15. Is professional installation recommended?
Yes. ABS control module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2009 Jeep Wrangler ABS Control Module
Get your 2009 Jeep Wrangler ABS Control Module P68032358AC, offered with vehicle-specific VIN programming.
ABS Control Module | VIN Programmed | Select 2009 Jeep Wrangler Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's factory braking system configuration.
-
Verify compatibility if your original module has a different part number.
-
Confirm the condition and included components of the replacement unit.
-
Arrange for any required ABS initialization or calibration after installation.
PART NUMBER AND VEHICLE COMPATIBILITY VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.