2009 Dodge Grand Caravan ABS Control Module 68053288 | VIN Programmed
- $499.00
-
Regular price
$1,312.50 -
-61%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2009 Dodge Grand Caravan ABS Control Module 68053288 | VIN Programmed
2009 Dodge Grand Caravan ABS Control Module – 68053288AC
VIN Programmed | Remanufactured ABS Control Module | ABS Initialization Required
Replace a faulty anti-lock braking system controller with the 2009 Dodge Grand Caravan ABS Control Module 68053288AC.
This remanufactured ABS control module is offered for compatible 2009 Dodge Grand Caravan vehicles experiencing ABS warning lights, traction control problems, ABS pump faults, or communication issues with the anti-lock braking system.
The ABS control module monitors wheel speed information and coordinates anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: ABS INITIALIZATION IS REQUIRED AFTER INSTALLATION.
Key Features
-
Vehicle Application: Select 2009 Dodge Grand Caravan models
-
Primary Part Number: 68053288AC
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
Condition: Remanufactured
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Post-Installation Requirement: ABS initialization
-
ABS Function: Supports factory anti-lock braking operation
-
Traction Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
Dodge Grand Caravan
-
2009 Dodge Grand Caravan
Important: Compatibility depends on the original ABS module part number, vehicle VIN, and factory braking system configuration.
Not every 2009 Dodge Grand Caravan necessarily uses the same ABS controller.
Verify the original ABS module number before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68053288AC
Additional Part Number References
-
68053288AA
-
68053288AB
-
P68053600AA
-
P68053600AB
-
68053600AC
-
68089525AA
-
68668333AD
These numbers were supplied as associated part-number references. Their interchangeability has not been independently verified.
Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Stored diagnostic trouble codes, if available
Important: The module is programmed before installation, but ABS initialization must still be performed after installation.
Additional configuration or calibration may also be required depending on the vehicle.
Common Dodge Grand Caravan ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning, if equipped
-
ABS pump running continuously
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
ABS pump motor circuit faults
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent or inaccurate speedometer readings
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
Proper diagnosis is recommended before replacing the ABS control module.
Common ABS Diagnostic Trouble Codes
C2116 – ABS Pump Motor or Supply Voltage Fault
May indicate an ABS pump motor circuit problem or electrical supply issue in applicable systems.
C2200 – ABS Control Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – ABS Control Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Control Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These are diagnostic references, not proof that part number 68053288AC has failed. Trouble code definitions and applicability should be confirmed using vehicle-specific service information.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation and ABS Initialization
Professional installation by a qualified automotive technician is recommended.
Installation Process
-
Verify the original ABS module part number.
-
Install the compatible replacement ABS control module.
-
Confirm VIN programming and vehicle configuration.
-
Perform the required ABS initialization using appropriate diagnostic equipment.
-
Complete any additional calibration procedures required by the vehicle.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: VIN programming does not eliminate the need for ABS initialization.
The vehicle should not be returned to service until the braking system has been properly checked.
Frequently Asked Questions
1. Will ABS module 68053288AC fit my 2009 Dodge Grand Caravan?
It is listed for compatible 2009 Dodge Grand Caravan vehicles. Confirm fitment using your VIN and original part number.
2. What is the full part number?
The primary part number is 68053288AC.
3. Is this ABS module remanufactured?
Yes. The supplied product information identifies it as a remanufactured ABS control module.
4. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
5. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for vehicle-specific programming.
6. Is ABS initialization required after installation?
Yes. ABS initialization is required after installation, even though the module is programmed beforehand.
7. Is this ABS module plug-and-play?
No. The supplied installation information specifically requires post-installation ABS initialization.
8. Are 68053288AA, AB, and AC interchangeable?
These are supplied as related part-number references. Compatibility must be verified before ordering.
9. Are P68053600AA, P68053600AB, and 68053600AC compatible?
They are supplied as associated references, but interchangeability has not been independently confirmed.
10. What does C2116 mean?
In applicable systems, it may indicate an ABS pump motor circuit or supply voltage problem.
11. What does C2200 mean?
It may indicate an internal ABS control module fault.
12. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
13. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control functions.
14. Is professional installation recommended?
Yes. Installation requires ABS initialization and may require specialized
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.