2009–2010 Dodge Nitro ABS Control Module 68046469 | VIN Programmed
- $399.00
-
Regular price
$1,312.50 -
-69%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2009–2010 Dodge Nitro ABS Control Module 68046469 | VIN Programmed
2009–2010 Dodge Nitro ABS Control Module – 68046469AB
VIN Programmed | Anti-Lock Brake System Control Module | Dodge Nitro ABS Module Replacement
Replace a malfunctioning anti-lock braking system controller with the 2009–2010 Dodge Nitro ABS Control Module 68046469AB.
This replacement ABS module is advertised for select 2009 and 2010 Dodge Nitro vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on the vehicle's factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicle: Dodge Nitro
-
Advertised Model Years: 2009–2010
-
Primary Part Number: 68046469AB
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2009–2010 Dodge Nitro
-
2009 Dodge Nitro — select configurations
-
2010 Dodge Nitro — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Vehicle trim and equipment
-
Drivetrain configuration
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2009–2010 Dodge Nitro necessarily uses the same ABS control module.
Compatibility with specific engines, trim levels, or drivetrain configurations has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68046469AB
The supplied product information identifies 68046469AB as the ABS module part number.
No additional part numbers, supersessions, or confirmed interchangeable references were provided.
Important: Do not assume that other revisions of the 68046469 part-number family are interchangeable without verification.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and drivetrain configuration
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2009–2010 Dodge Nitro ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Wheel speed sensor-related warning lights
-
Intermittent or inaccurate speedometer readings
-
Speedometer not functioning
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms can also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The following codes were supplied as diagnostic references for this product listing.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate a problem involving the ABS pump motor circuit or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that part number 68046469AB has failed. Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number.
-
Installing the compatible replacement ABS control module.
-
Confirming VIN programming and vehicle configuration.
-
Performing
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.