2008 Dodge Caravan & Chrysler Town & Country ABS Module P04721601 | VIN Programmed
- $499.00
-
Regular price
$1,312.50 -
-61%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2008 Dodge Caravan & Chrysler Town & Country ABS Module P04721601 | VIN Programmed
2008 Dodge Caravan & Chrysler Town & Country ABS Control Module – P04721601AI
VIN Programmed | Anti-Lock Brake System Control Module | ABS Module Replacement
Replace a malfunctioning anti-lock braking system controller with the 2008 Dodge Caravan and Chrysler Town & Country ABS Control Module P04721601AI.
This replacement ABS control module is advertised for select 2008 Dodge Caravan and 2008 Chrysler Town & Country vehicles experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicles: 2008 Dodge Caravan and 2008 Chrysler Town & Country
-
Primary Part Number: P04721601AI
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
VIN Programming: Programmed using your vehicle's supplied VIN
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2008 Dodge Caravan
-
2008 Dodge Caravan — select configurations
2008 Chrysler Town & Country
-
2008 Chrysler Town & Country — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2008 Caravan or Town & Country necessarily uses the same ABS control module.
The supplied listing identifies the Dodge Caravan, but does not separately establish compatibility with every Grand Caravan configuration.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
P04721601AI
Alternative Part Number Format
-
04721601AI
The supplied information identifies 04721601AI as an alternative format of the primary part number.
Additional Part Number References
-
68030939AA
-
68030939AB
These additional numbers were supplied as associated references for this product listing.
Their interchangeability with P04721601AI has not been independently verified.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
VIN Programming
This ABS control module is VIN programmed for your vehicle using the VIN supplied with your order.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and vehicle configuration
-
Stored diagnostic trouble codes, if available
Additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Wheel speed sensor-related warning lights
-
Intermittent or inaccurate speedometer readings
-
Speedometer not functioning
-
Loss of anti-lock braking functionality
Diagnostic Note: These symptoms may also result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean that the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The following codes were supplied as diagnostic references for this product listing.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate a problem involving the ABS pump motor circuit or insufficient electrical supply voltage.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that part number P04721601AI has failed. Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Depending on the vehicle and repair, installation may require:
-
Verifying the original ABS module part number.
-
Installing the compatible replacement ABS control module.
-
Confirming VIN programming and vehicle configuration.
-
Performing required ABS initialization or calibration.
-
Bleeding the hydraulic brake system if necessary.
-
Clearing stored diagnostic trouble codes.
-
Testing ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P04721601AI fit my 2008 Dodge Caravan?
It is advertised for select 2008 Dodge Caravan vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. Will this ABS module fit my 2008 Chrysler Town & Country?
The 2008 Chrysler Town & Country is included in the advertised application. Exact fitment requires verification.
3. What is the full ABS module part number?
The primary part number is P04721601AI.
4. Is 04721601AI the same part-number format as P04721601AI?
The supplied listing identifies 04721601AI as an alternative format of P04721601AI.
5. Is 68030939AA compatible with P04721601AI?
The supplied listing associates these numbers, but interchangeability has not been independently verified.
6. Is 68030939AB interchangeable with P04721601AI?
Compatibility must be confirmed using the original ABS module number and vehicle VIN.
7. Does this module fit every 2008 Caravan or Town & Country trim?
Not necessarily. Fitment may vary according to the original module number and factory braking system configuration.
8. Does this module fit the 2008 Dodge Grand Caravan?
The supplied listing names the Dodge Caravan. Compatibility with a particular Grand Caravan configuration should be verified before ordering.
9. Is this ABS module VIN programmed?
Yes. The module is programmed using your vehicle's supplied VIN.
10. Do I need to provide my VIN?
Yes. Your 17-digit VIN is required for programming.
11. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
12. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control functions.
13. What does C2116 mean?
It may indicate an ABS pump motor circuit fault or insufficient pump supply voltage.
14. What does C2200 mean?
It may indicate an internal ABS control module fault.
15. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
Order Your 2008 Dodge Caravan or Chrysler Town & Country ABS Control Module
Get your 2008 Dodge Caravan or Chrysler Town & Country ABS Control Module P04721601AI, VIN programmed for your vehicle.
VIN Programmed | ABS Control Module | Select 2008 Caravan and Town & Country Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's engine and braking system configuration.
-
Arrange for any required ABS setup or calibration after installation.
PART NUMBER VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.