2008 Chrysler Town & Country ABS Pump Control Module 68030939 | VIN Programmed
- $499.00
-
Regular price
$1,312.50 -
-61%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2008 Chrysler Town & Country ABS Pump Control Module 68030939 | VIN Programmed
2008 Chrysler Town & Country ABS Pump Control Module – 68030939AA
VIN Programmed | Anti-Lock Brake System Control Module | Part Number 68030939AA
Replace a malfunctioning anti-lock braking system controller with the 2008 Chrysler Town & Country ABS Pump Control Module 68030939AA.
This replacement ABS control module is advertised for select 2008 Chrysler Town & Country minivans experiencing ABS warning lights, traction control problems, communication faults, or other issues involving the anti-lock braking system.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
VIN PROGRAMMED FOR YOUR VEHICLE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicle: 2008 Chrysler Town & Country
-
Primary Part Number: 68030939AA
-
Component Type: ABS Pump Control Module
-
VIN Programming: Vehicle-specific programming offered
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed information
-
Traction Control: Supports applicable factory-equipped systems
-
Electronic Stability Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
-
Installation: Additional vehicle-specific setup may be necessary
Vehicle Compatibility
2008 Chrysler Town & Country
-
2008 Chrysler Town & Country — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2008 Chrysler Town & Country necessarily uses the same ABS control module.
Compatibility with every engine, trim level, or factory braking system configuration has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
68030939AA
The supplied product heading identifies 68030939AA as the primary ABS pump control module part number.
No confirmed supersession or interchangeable replacement numbers were supplied for this listing.
Important: Do not assume that another suffix revision or a visually similar ABS module is interchangeable with 68030939AA.
Confirm compatibility using your original ABS module number and vehicle VIN before ordering.
VIN Programming
This ABS control module is offered with vehicle-specific VIN programming.
Required Vehicle Information
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and factory braking system configuration
-
Stored diagnostic trouble codes, if available
Provide your 17-digit VIN when ordering so the correct vehicle configuration can be checked.
Depending on the vehicle and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
VIN programming does not guarantee plug-and-play installation.
Common 2008 Chrysler Town & Country ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump running continuously
-
ABS pump motor-related faults
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Intermittent electrical power loss
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent or inaccurate speedometer readings
-
Loss of anti-lock braking functionality
Diagnostic Note: These are general ABS-related symptoms, not confirmed faults specific to part number 68030939AA.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The product heading does not supply specific diagnostic trouble codes.
The following are general ABS diagnostic examples, not confirmed codes for part number 68030939AA.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that ABS module 68030939AA has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Pump Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Confirm whether the replacement includes the electronic controller, hydraulic pump assembly, or both.
-
Install the compatible replacement component.
-
Confirm VIN programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: Although the product title refers to an ABS pump control module, the supplied information does not establish whether the item includes the complete hydraulic pump assembly or only the electronic controller.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module 68030939AA fit my 2008 Chrysler Town & Country?
It is advertised for select 2008 Chrysler Town & Country vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. What is the full ABS module part number?
The primary part number is 68030939AA.
3. Does this ABS module fit every 2008 Chrysler Town & Country trim?
Not necessarily. Fitment may vary according to the original ABS module and factory braking system configuration.
4. Is 68030939AA an ABS pump or an ABS control module?
The product is described as an ABS pump control module. Confirm whether the listing includes the electronic controller alone or a complete pump assembly.
5. Does this replacement include the hydraulic ABS pump?
The supplied information does not confirm that a hydraulic pump assembly is included.
6. Are other 68030939 part-number revisions interchangeable?
Interchangeability has not been established. Verify any alternative part number before ordering.
7. Is this ABS module VIN programmed?
Vehicle-specific VIN programming is offered. Confirm the programming details when placing your order.
8. Do I need to provide my VIN?
Yes. Provide your 17-digit VIN for vehicle-specific programming and fitment verification.
9. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
10. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes. ABS controller faults may illuminate the ABS warning light, although other braking system problems can produce the same symptom.
11. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control and electronic stability control functions.
12. What does C2116 mean?
In applicable systems, it may indicate an ABS pump motor circuit fault or insufficient pump supply voltage.
13. What does C2200 mean?
In applicable systems, it may indicate an internal ABS control module fault.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. ABS pump and control module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2008 Chrysler Town & Country ABS Pump Control Module
Get your 2008 Chrysler Town & Country ABS Pump Control Module 68030939AA, with vehicle-specific VIN programming.
VIN Programmed | ABS Pump Control Module | Select 2008 Chrysler Town & Country Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN.
-
Confirm your vehicle's factory braking system configuration.
-
Verify whether the replacement includes the controller, pump, or complete assembly.
-
Arrange for any required ABS setup or calibration after installation.
PART NUMBER AND COMPONENT VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.