2007 Dodge Durango ABS Control Module P52855644 | VIN Programmed
- $599.00
-
Regular price
$1,312.50 -
-54%
- 4 available
Couldn't load pickup availability
Lifetime Warranty
Reliable support you can trust
Free Shipping
Throughout the USA
Best Prices
In The Market
15 Years In Business
30,000+ Customers Served
In-House Experts
Hablamos Español
2007 Dodge Durango ABS Control Module P52855644 | VIN Programmed
2007 Dodge Durango ABS Control Module – P52855644AE
Remanufactured | Pre-Programmed | Anti-Lock Brake System Control Module
Replace a malfunctioning anti-lock braking system controller with the 2007 Dodge Durango ABS Control Module P52855644AE from Auto Computer Performance.
This remanufactured ABS control module is advertised for select 2007 Dodge Durango SUVs. It is intended as a replacement for a compatible ABS controller that has been properly diagnosed as faulty.
The ABS control module processes wheel speed information and helps coordinate anti-lock braking functions. Depending on factory equipment, it may also support traction control and electronic stability control.
The supplied product information describes this replacement module as remanufactured and pre-programmed, offering an alternative to purchasing a new replacement controller.
PRE-PROGRAMMED ABS CONTROL MODULE
IMPORTANT: VERIFY YOUR ORIGINAL ABS MODULE PART NUMBER BEFORE ORDERING.
Key Features
-
Advertised Vehicle: 2007 Dodge Durango
-
Primary Part Number: P52855644AE
-
Additional Listed Part Numbers: P52855644AD and P52855644AB
-
Condition: Remanufactured
-
Component Type: Anti-Lock Brake System (ABS) Control Module
-
Programming: Pre-programmed
-
Anti-Lock Braking: Supports applicable factory ABS functions
-
Wheel Speed Monitoring: Processes wheel speed information
-
Traction Control: Supports applicable factory-equipped systems
-
Fitment Verification: Required before ordering
Vehicle Compatibility
2007 Dodge Durango
-
2007 Dodge Durango — select configurations
Compatibility may depend on:
-
Original ABS module part number
-
Engine configuration
-
Two-wheel drive or four-wheel drive
-
Vehicle trim and equipment
-
Factory braking system configuration
-
Vehicle VIN
Important: Not every 2007 Dodge Durango necessarily uses the same ABS control module.
Compatibility with every engine, trim level, or drivetrain configuration has not been independently established.
Verify your original ABS module part number and VIN before ordering.
Part Numbers and Cross-References
Primary Part Number
-
P52855644AE
Additional Listed Part Numbers
-
P52855644AD
-
P52855644AB
The supplied product information identifies P52855644AE, P52855644AD, and P52855644AB as fitting part numbers for this replacement module.
Although these numbers share the same base part number, they have different suffixes.
The complete supersession history and vehicle-specific interchangeability have not been independently verified.
Important: Confirm compatibility using your original ABS module part number and vehicle VIN before ordering.
Remanufactured ABS Control Module
This 2007 Dodge Durango ABS Control Module P52855644AE is advertised as a remanufactured replacement.
A remanufactured ABS control module may provide a cost-effective alternative to purchasing a new replacement unit when the original controller has been properly diagnosed as faulty.
The supplied listing describes the unit as a reliable remanufactured module. Specific testing procedures, software revisions, and performance results have not been independently verified.
Pre-Programmed ABS Control Module
This ABS control module is advertised as pre-programmed.
The supplied information does not specify whether programming is completed using a customer-provided VIN or a standard compatible configuration.
Information to Confirm Before Ordering
-
17-digit VIN
-
Vehicle year and model
-
Original ABS module part number
-
Engine and drivetrain configuration
-
Factory braking system configuration
Provide your 17-digit VIN for fitment verification and confirm the programming requirements when ordering.
Depending on the vehicle and replacement procedure, additional ABS initialization, configuration, or calibration may be required after installation.
Pre-programming does not guarantee plug-and-play installation.
Common 2007 Dodge Durango ABS Module Problems
A malfunctioning ABS control module may be associated with:
-
ABS warning light illuminated
-
Traction control warning light illuminated
-
Electronic Stability Control warning
-
ABS pump motor-related faults
-
ABS pump running continuously
-
Intermittent ABS operation
-
No communication with the ABS module
-
Diagnostic scanner communication failures
-
Internal ABS control module faults
-
ABS solenoid valve-related faults
-
Wheel speed sensor-related diagnostic codes
-
Intermittent braking system warning lights
-
Loss of anti-lock braking functionality
Diagnostic Note: These are general ABS-related symptoms, not confirmed faults specific to part number P52855644AE.
Similar symptoms may result from faulty wheel speed sensors, damaged wiring, low battery voltage, poor electrical connections, or other braking system components.
An illuminated ABS warning light does not necessarily mean the ABS control module has failed.
Proper diagnosis is recommended before replacing the module.
Common ABS Diagnostic Trouble Codes
The supplied product information does not identify specific diagnostic trouble codes for this module.
The following are general ABS diagnostic examples, not verified fault codes for part number P52855644AE.
C2116 – ABS Pump Motor Fault / Pump Supply Low Voltage
May indicate an ABS pump motor circuit problem or insufficient electrical supply voltage in applicable systems.
C2200 – Anti-Lock Brake Module Internal Fault
May indicate an internal electronic malfunction within the ABS control module.
C2200-49 – Anti-Lock Brake Module Internal Electronic Fault
May identify an internal electronic fault in applicable ABS systems.
U0121 – Lost Communication with ABS Module
Generally indicates that another vehicle control module has lost communication with the ABS controller.
Important: These codes do not independently confirm that ABS module P52855644AE has failed.
Vehicle-specific diagnostic procedures should be followed before replacing the module.
ABS Control Module Functions
Depending on factory equipment, the ABS control module supports:
-
Anti-lock braking
-
Wheel speed monitoring
-
Hydraulic brake pressure regulation
-
Traction control
-
Electronic stability control
-
ABS fault monitoring
The ABS system helps reduce wheel lockup during hard braking and supports vehicle control in low-traction conditions.
Installation Information
Professional installation by a qualified automotive technician is recommended.
Installation Overview
-
Verify the original ABS module part number.
-
Install the compatible replacement ABS control module.
-
Confirm programming and vehicle configuration.
-
Perform any required ABS initialization or calibration.
-
Bleed the hydraulic brake system if necessary.
-
Clear stored diagnostic trouble codes.
-
Verify ABS, traction control, and stability control operation.
Important: The supplied product information identifies an ABS control module but does not establish whether the item includes the electronic controller alone or a complete hydraulic pump assembly.
Confirm the included components before ordering.
Always verify proper braking system operation before returning the vehicle to service.
Frequently Asked Questions
1. Will ABS module P52855644AE fit my 2007 Dodge Durango?
It is advertised for select 2007 Dodge Durango vehicles. Confirm compatibility using your VIN and original ABS module part number.
2. What is the full ABS module part number?
The primary part number is P52855644AE.
3. Is P52855644AD compatible with P52855644AE?
The supplied listing identifies P52855644AD as a fitting part number. Exact compatibility should be confirmed using the original module number and VIN.
4. Is P52855644AB compatible with P52855644AE?
The supplied listing identifies P52855644AB as a fitting part number. Verify compatibility before ordering.
5. Are P52855644AB, P52855644AD, and P52855644AE interchangeable?
The supplied listing groups these numbers together, but the complete interchangeability and supersession history have not been independently verified.
6. Does this ABS module fit every 2007 Dodge Durango trim?
Not necessarily. Fitment may vary according to the original ABS module and factory braking system configuration.
7. Does this module fit both 2WD and 4WD Dodge Durango vehicles?
Compatibility with both drivetrain configurations has not been independently confirmed.
8. Is this ABS module remanufactured?
Yes. The supplied product information describes the module as remanufactured.
9. Is this ABS module pre-programmed?
Yes. The supplied listing advertises the module as pre-programmed.
10. Do I need to provide my VIN?
Provide your 17-digit VIN for fitment verification. Confirm whether it is also required for programming.
11. Is this ABS module plug-and-play?
Not necessarily. Additional initialization, configuration, or calibration may be required after installation.
12. Can a faulty ABS module cause the ABS warning light to illuminate?
Yes. ABS controller faults may trigger warning lights, although other braking system problems can produce similar symptoms.
13. Can a faulty ABS module cause the traction control light to illuminate?
Yes. ABS system faults may affect applicable traction control functions.
14. What does U0121 mean?
It generally indicates lost communication with the ABS control module.
15. Is professional installation recommended?
Yes. ABS module replacement may require specialized diagnostic equipment and braking system procedures.
Order Your 2007 Dodge Durango ABS Control Module
Get your 2007 Dodge Durango ABS Control Module P52855644AE, remanufactured and pre-programmed.
Remanufactured | Pre-Programmed | Select 2007 Dodge Durango Applications
Before ordering:
-
Verify your original ABS module part number.
-
Provide your 17-digit VIN for fitment verification.
-
Confirm your vehicle's engine and drivetrain configuration.
-
Verify compatibility if your original module is P52855644AD or P52855644AB.
-
Confirm whether additional ABS initialization is required after installation.
PART NUMBER VERIFICATION REQUIRED BEFORE ORDERING.
Looking for a Different Module?
Search by part number, year, make, model, engine / platform, or module type.